Search results for query: *

I'm looking for the rubber radiator hoses that have the springs inside. Anybody have any ideas on where to get them for my 75 dart w/ a 360?

Looking for a shop who can dyno-tune my Dart in the Minneapolis/St. Paul area. Any ideas?

Hello, I'm looking for a set of police hubcaps to go on my police wheels. Let me know. Mick

We just registered for the 2009 Car Craft nationals in St. Paul, MN. Anybody else coming?

I am looking for a Hemi scoop for my 75 Dart. Anybody have one?

My 8 1/4 axle is done and painted. Now, I'm trying to save a buck or two. I was at the junk yard a couple weeks ago and noticed a couple of late 70's and early 80's Fury's with 360/904's and 8 1/4 rears. I was wondering if those drive shafts would bolt into in my Dart? It was just an idea.

I was hoping someone could help me on figuring out what speedometer gear I need. I have 205/70 14 on the front, and 235/60 14 on the rear. All four rims are 14x7. The trans is a 904 and my rear is an 8 1/4 with 3.55's. Thanks, Mick

I found a carrier for my 8 1/4 rebuild. Since the current 8 1/4 has 245 gears, I need to replace the carrier with 276 or lower. I found a donor car in a junk yard with the carrier I need. The only problem is the center pin doesnt want to come out. Its the only thing that is holding me up. Does...

I need a 273 or lower carrier for my 8 1/4. Trying to get the axle done before the Mopars in the park show in MN. Any leads are appreciated.

Hey guys/gals. I need to find a 273 or lower center section for my 8 1/4 rear that I am rebuilding. Any help or leads would be much appreciated.

Anybody have a drive shaft loop for sale out there?

I took my Dart out last night for a little cruise. I was about 10 miles from my house when the drive shaft decided it was done for the night. Luckily I coasted into a drive way that belongs to two car mechanic shops. Luckily there was some one there to help me, but they wouldnt be able to fix my...

Hey wankers! I need your help on a very important decision. I bought a new radio and debating on taking the old stock A.M. radio out. The problem is that I'll have to cut the stock dash to make this new deck fit. Or, should I mount it under the dash and leave the old radio in. What have you guys...

Anybody from Minnesota that knows of older mopars in junkyards. When the weather warms up, I plan on going to windy hills to look around.

My top is getting beat up, and I would like to replace it. Anybody have tips for me? Do I have to pull the front and rear glass? Any help appreciated.

I just filled out my registration for Mopars in the park. Spring is right around the corner!

I will be taking my 8 1/4 to a local shop to install new 321's. He says he wants the axles out of the rear. Is this easy to do, and what do I have to know when I take them out and more importantly put back in with fresh gears? I dont want to hurt anything. Any help or advice is greatly...

I was thinking of getting a fiberglass hood for my 75 Dart. I'm looking at a hemi scoop hood from usbody source. Anybody know anything about them?

Wondering if anybody here will travel to St. Paul for the Car Craft Summer National's? Me and the fam will be there all three days.

I'm looking at a 8 1/4 limited slip 3rd member out of a 79 Diplomat. It's for my 8 1/4 rear end in my 75 Dart. any ideas?

Well I tried to use an electric fan from a 97 cougar. Unfortunately it wont fit. I then trimmed the shroud down, then I figured I could use the shroud by removing the fan. Nothing seemed to work. I was wondering if those cheesy style universal shroud's (the type sold in Jegs or Summit) would...

I have a 75 Dart with the "fixed" seatbelts. I hate the way they look. Anybody have suggestions on how to remedy this? I suggested to my wife about installing lap belts, but she's into safety...what ever.

I have the Lokar throttle cable and the Lokar kick down cable. I was wondering if I need the spring that would hook to the carb and to the bracket that is typically located at the front of the manifold? Any thoughts?

I went to a local junk yard and pulled an electric fan off of a 1997 Cougar with the 4.6 motor. They have two settings, low setting is rated at 2500 cmf and the high setting up to 4500 cfm. It measures 22" x 17" x 5". I cant wait to put it on in the spring. Last summer my car got up to 220...

Out of curiosity (sp?), what is the difference between a big block or B-body 22" fan shroud compared to a small block or A-body 22" shroud? I have a 22" aluminum radiator and a mopar viscous fan. Why can't I use a B body, or big block fan shroud on my 75 Dart with a 360?

I was playing with the idea of starting a car club in Minnesota. Anybody interested?

For those that live in the Twin City area, there will be a car show at Fury Motor's located in So. St. Paul on May 9th at 7:00 p.m. It's sponsored by my car club Mid-West Mopars.

I picked up a pair of torsion bars a couple of years ago for my /6 to 360 conversion. The guy said that they where off of a 340 A-body. Is there a way to check if these would be an upgrade from the /6 bars?

I was thinking about putting a Hemi scoop on my Dart. Anybody have one on their car? I tried the 6-pac scoop, but it needed serious work to look good. What do you guys think?

Me and my wife and some friends saw Rush last night in St. Paul last night. This was my first Rush concert, and I was very impressed with them "live". I can't beleive the talent these three guys have. What an awsome show. The next show we are going to try and get tix for is Van Halen in Oct...