Hi all, its been a while since I've been here at A Bodies. I just returned home from having triple bypass surgery and reality is setting in. I have an ongoing restoration project (68 Barracuda Notchback) that I now know will never be finished. My wish would be to sell it complete knowing that...
Just Kidding!!!!!!!!!!
I have a date coded double pulley Alternator, square back type. It is date coded July, 1973. If someone is doing a restoration and is looking for date coded parts, please contact me I will accept any reasonable offer . The part is located in New Castle, Pa...
I am moving and trying to lighten the load by selling some parts I won't be using. I have what appears to be an original starter from a 69 340 engine. Since I won't be using it, I figure someone here may be looking for a date coded original in working condition.
Where can I find the build...
For sale:
A very nice set of maroon A-Body kick panels. They are off of a 76 Dart Sport. The Drivers side panel is correct for 1976 models only but will fit all 67 and up A-Body cars. The difference is the cut out for the fresh air vent which was changed for 1976 cars...
For Sale,
A very nice set of 340 A-Body 892/893 torsion bars .870 Dia. These bars are freshly striped and painted. Asking $120.00 plus shipping. Parts are located in New Castle, Pa 16105.
Please contact me via the PM system here at FABO.
Thank you.
It looks like I will be moving to Western New York, South Valley area (Frewsburg mailing address), Cattaraugus County, Do we have any members in this area?
Russ
If so, what kind of charges are being applied (closing costs) by the lender. I am applying through Wells Fargo and so far they will not provide an estimate of settlement charges. This makes me wonder. I'm concerned about getting blindsided after being deep into the game.
Anyone who recently...
I may need some advice. I am in the process of buying another home and need to make a decision on what to do with my present house. Plan A is to sell it but I am preparing for Plan B in the event it does not sell within a reasonable amount of time.
In the event of plan B, how does one go...
HI All,
I hope this is the right place to post this question. I am noticing the blower motor on my forced air furnace seems to be struggling to start. It always does start but for the initial few seconds it sounds like it is straining. Any ideas what could cause this? I'm thinking...
This is a decent (not perfect) chrome 14X3" drop base air cleaner with a 2" steel riser. The base has a 1-1/2" drop.
It shines nicely but does have a few pits and blemishes caused by a pie pan siting on top. Hopefully, someone can use this. Part is located in western Pa. Zip code 16105...
I am looking to buy a 2010 or 2011 Jeep Grand Cherokee Overland with a 5.7 Hemi V-8.
What kind of gas mileages are you actually getting? Any other comments from those who own one of these vehicles would be appreciated.
I'm looking to replace my aging 97 Ford Expedition 5.4 with the GC...
Hi all,
I'm looking at a 2009 used vehicle. It has a Carfax report of having sustained structural damage but does not elaborate other than to say no report of airbag deployment.
Is there any way of obtaining more specific information explaining the damage in more detail...
For sale,
One set of A-body 340 892-893 torsion bars. These bars are original Chrysler equipment from my 68 Barracuda and are in good used condition. $100.00 plus shipping. I will consider reasonable offers. Parts are located in Western, Pa (zip 16105)
Thank you,
Russ
Hi there,
I have a Carter AFB, Model 9636S, 625 CFM parts carb for sale. It is complete other than the electric choke thermostat. One of the idle adjustment screws is broken off. I attempted to extract it without success. Other than that, it would be a candidate for a rebuild...
I have a decent engine/forward light wiring harness for a small block equipped 68 Barracuda. This harness has not been cut up, has no melted wires and the bulkhead plugs are in great shape. Most of the original terminals are there but a few have been changed. The worst I see is 2 missing...
I have a nice (like new) 33 tooth green speedometer gear from an 833 4-speed. I believe this will work with 727 or 904 automatic's but not certain. This gear is correct for a 323 gear ratio with a 26 inch tall tire. I ran it in my 68 Barracuda with P215/70R-14 tires and the speedometer was...
I am replacing my engine forward harness (68 Barracuda small block) the original is in good (uncut) condition with all ends and connectors still there. Is it worth anything?
Russ
I'm looking to buy a K-H SBP front disc brake setup for my 68 Barracuda. The setup comes with hubs not attached to the new rotors and without the studs. My question is how do the hubs attach to the rotors and are the KH wheel studs readily available.
Any help is much appreciated.
Russ
For anyone wanting retain their original Kelsey Hays 4 piston Disc set up, are any of the parts suppliers offering replacement SBP rotors? If so, who?
Russ
For Sale,
A nice clean Edelbrock Performer Carburetor. Model 1407, 750 CFM with electric choke. This carb was running well when last used a bit over a year ago. It should be fine as is but may need a kit. Asking $135.00 total, shipping and insurance included anywhere in the...
For Sale,
A decent set of 68 Barracuda hood inserts. Chrome still shines quite well but typical pitting is present. Parts are located in New Castle, Pa. 16105
Asking $50.00 shipped anywhere in the lower 48 states.
Please use PM system here at FABO in order to...
For Sale,
A set of used hood mounted turn signal indicators for a 68 Barracuda. Both have been tested and do work. The chrome shines but is worn, typical of a 45 year old part. The wire end terminals need replaced. Parts are located in New Castle, Pa. 16105
$35.00...
Hi All,
I'm looking for a good used Electric Choke Thermostat for a Edelbrock Performer 750 CFM Carb.
Please contact me with details via PM here at FABO.
Thank you,
Russ
For Sale,
A nice 26 inch 2 row radiator, Chrysler Part # 3443951. This rad was in my 68 Barracuda and kept the 340 running cool. It is correct for a 1971 C-Body 383 A/T and A/C.
My barracuda has a 22 inch core support opening, This rad overlapped the opening by 2...
Hi all,
I have a 26 inch 2 row radiator, part # 3443951 and 59538 is under the 3443951.
It was in my 68 Barracuda when I bought it and worked well with a 340. I would like to ID the proper application for this rad so I can...
For sale,
A Transmission Crossmember, mount and bolts correct for all 70-72 E-Bodies and 71-72 B-Bodies. This piece actually is off of a 70 AAR Cuda. Asking $100.00 + Shipping but will consider reasonable offers. Parts are located at New Castle, Pa
Please contact me...
I have a set of fender to firewall shields left over from a 67 Satellite I sold some time ago. I would like to sell them but have no idea what to ask. Anyone having an idea of their value, please let me know.
Thank you,
Russ
For sale:
A decent set of A-Body windshield stainless trim from a 68 Barracuda. Suitable for a driver but would need polished for it to be show quality. It has a few minor dings but no bends or kinks. This trim should fit all A-Body 2 door hardtops from 68 to 76 and will work on 67's...
For sale, 1407 Edelbrock Performer Carburetor, 750 CFM with manual choke. I do have the linkage and bracket to convert to an electric choke but the buyer will have to add the thermostat.
This carb was working fine when put into storage about a year ago. I checked it out and...
Hi All,
I'm looking for a nice set of dark red or Maroon A-pillar trim for a 67-72 Dart, Barracuda, Valiant or Scamp. Must be in very good condition.
Send details via PM here at FABO.......
Thank you,
Russ