Search results for query: *

Does anyone have a 7.25 sure grip unit for sale? Located in MD but I’ll pay shipping no problem.

1. Her son is learning body/paint work in prison. 2. If a tornado takes out the mobile home, the whole family can live in the RoadRunner. 3. Back in the 80s, 90s especially I have seen this situation many times. Sometimes even an old hemi car missing the hemi and vin and trim tags. Ok.... so...

I’ve never really seen a good Maaco paint job, I have seen really bad maaco paint jobs.

Prices being what they are.... not horrible 1968 Plymouth Barracuda · Barracuda

Really surprised and also happy that mega parts us selling m&h now.

THIS. You MUST test under load "cranking." That is the way voltage drop works. If you can't measure the battery in the trunk by yourself, "rig" some wire from the meter up front to the battery. Use your head. You can use an extension cord, EG example: Get an extension long...

Also not sure about 72 cars but maybe part of all this is clutch safety switch too? But looks to me it may be for NOX sensor wiring

What do you think shipping would be to 58523? Thanks.

anything that keeps to back emf in the 300-400V range protects that tacho GM used a condenser and a resistor i think. plug in loom on a plastic bracket with a radio suppression cap jaguar and Lucas used a zener diode as per the original motorola product sheet circuit diagram for the...

I just have to say, I have NEVER seen a T bar come out at an angle like that. Do you have a shop manual? Somewhere in there is the car/ unibody dimensional points. I would be checking the car for dimensional "bent." And it's already been mentioned, are the bars bent? Other than...

Man, the Power Tour has always been a bucket list item for me. It passed through the city I live in about 10 years ago but my car was in pieces. I always have hope that it will head back south again. For the last several years, the drive to get to it would be longer than the actual tour. I have...

Post a photo. You might have the wrong Z bar in there. I have a similar setup. 72 duster, 340, 4 speed, Lakewood scatter shield / block plate, mini starter and TTI headers, with no clearance issues.

The best I could do with the strut rod in there was to jack up the front edge of the k-frame. The bar wouldn't go in when I did that, and it also wouldn't pull back out until I released the jack so it seems that was the opposite way to go? Referring to this I've moved things enough to where...

Right from the tti website: https://ttiexhaust.com/Sheets/Zbar_sheet340ZB.pdf

Morning all, woke up at 2 am and went out to the recliner took a couple of Ibuprofen and passed out till 6. Feel better now, breakfast and coffee and unload truck and put things away.

Take pics of what you have and post them...

Given the option to run either a reproduction BB A-body oil pan or a Hemi pan which would be the better option of the two? This is for a stock appearing stroker A-body drag car. There is some leeway in what pan I can use, just no monster sump stuff that hangs WELL BELOW the K-frame. Oil control...

NOX sensor wiring. Where was your car made? California? Diagram attached is for automatic. Find manual diagram.

Hello I'm new to this forum. I have a 1968 Plymouth valiant that I'm putting back together. My slant 6 is bad. Number 3 cylinder has a big gash in it so I'm trying to find a real good slant 6 and transmission ready to go for it. I live in KY so anyone fairly close that might be able to help me...

A couple time savers for me is after I set my pinch dimensions (on my head rotator) to give me more room to work the port I move on to the common wall and port to the tube. This all gives me better visual and max room. I then flip the head roof side down to raise the roof before I touch the...

I have a 70 Dart Swinger, 340, 4 speed. Totally redid this car over many years. I put TTI headers on and a mini starter from Summit. The clutch bell crank, when you depress the clutch, hits the starter and the one header pipe and then won't retract all the way. You have to manually pull it all...

Thank you for the advice, that's what I'll do.

Only 11 days until :eek: :D

This is the connection that powered everything up. There was a what I will call a splitter that connected into the fusable link with a heavy blue wire coming out of it not sure if it needs to be connected. Hopefully you can see what I am talking about in the pictures

This fiberglass wing came with my 68 Barracuda. Im not diggibg it, so its up for sale. I have no info on it all. Its missing a screw or two, but looks to be all there. $100 plus shipping from 18411. Paypal. Venmo. Money Order.

Better off with a wider ring gap, even if it seems ridiculous, than a tighter one.

What was the harness part number your purchased?

Still available Tom