Search results for query: *

Nice! Can't beat a price like that!

Nice! :thumbsup: Bolt on or pin on?

here's a few. Snorkel Drag Car Fiberglass Hood Air Scoop, 1-Piece, 28 x 17 x 6 Fiberglass Hood Scoops Snorkel Fiberglass Hood Scoop, 1-Piece | eBay

Try Legendary Interiors. On their website you can request free samples of vinyl for comparing to original before you order and this will help you determine correct color needed. Legendary Auto Interiors Sample Request Go to this link and register. Then pick out all the sample pieces you want...

No luck at AMD for rear notchback glass. They don't carry any year rear glass or gasket for the notchback. They do have the front windshield though in stock, and do carry the front gasket but it's out of stock.

I'm headed to AMD in about 30 minutes to pickup some parts. They are about a 20 minute ride from my house. I'll ask them about the glass and report back tonight.

Got it! I thought the slotted hole looked familiar! Definitely a quality control screw up at the factory!

I wonder what car that may be for or the purpose of those holes? Maybe they sent you the wrong part or it got put in the wrong parts bag. Here is a picture of mine that I referenced above in and earlier post I got from AMD. It is a dead match for 69 dodge.

I think this is what you may be looking for. Description on link page reads: These reproduction rubber weatherstrips fit into a channel in the chrome strip located on rear of the front door glass. These seal between the front door glass and quarter window glass. Sold as a pair. Soffseal CH2022...

They will go behind the quarter panel in the corner.

Advanced Plating - Nashville, TN Saw this company showcased on Spikes Powerblock TV before. They look to do great work and specialize in pot metal items. When I get ready to my brite work on my car I will be contacting them to redo my chrome items. Advanced Plating Shop Tour Nashville, TN

Just to give you an idea of cost...the AMD installation shop here in GA charges $700 to install a full quarter. So I'd say $1200-1500 sounds reasonable for what your looking at. Just make sure you ask to see some of their other work too before deciding If you've never dealt with them. they may...

Hope that made sense! Lol

That's what I was thinking but I'm not sure if they said the same armrest and interior door handle as a 69. I saw a couple at the Nat's this weekend but the door handle was different and in a different location. I wasn't sure what year they were or if the entire door was the same and back in...

what years will fit a 69 Dart without any issues of having to worry about interior or hardware locations? I need a drivers door and can't seem to find one year specific, but have ran across some from the 70 year range. I just don't know as much about the 70 year range darts or seen one side by...

Here are some pictures of my original hood and I can barely see a ridge at the front but I feel the top of the hood is more or less just rounded than have a definitive ridge. But I'm of course just going if memory since I can't just walk outside and look at mine. It's a few states away. :(

The one on their website appears to even have that ridge. I don't remember the originals having a ridge that pronounced.

Where did you purchase the hood?

I have! We welded up the holes using a thick piece of copper on back of the hole so it would be flush insdie the body. Next, ground down the weld almost flush with qp, then hit it with a hand file until flush being very careful to not alter body line. Then did a light coat of body filler and...

Shouldn't there be some metal trim that covers this area inside the car? I had a 69 Cuda notchback at one point and could of swore it had a metal trim around the inside of the rear window, but that was years ago. My 69 Dart I do know has this metal trim inside. I somehow still have the...

That looks pretty good to be hand made! I agree with you on the floor pans too. Much less labor and time to just go ahead and replace it all with 1 piece instead of 2 halves or 4 pieces.

Here you go! AMD sells it for $22. This one is for 68-76 A bodies. You have to look under Fuel System. Not sure why its under that because you would think it would be in the Body Components section with the trunk floor stuff. When I bought my trunk floor it was in the box with the floor...

Here is a great video I ran across on youtube.

.

Are you talking about the tail light housings that are part of the actual car body or do you mean the tail light buckets that the lenses screw to and then you mount to the body?

I think you'll be pleased. They have pretty good quality stuff. Last year I spent almost $3k with AMD on rear driver's quarter, deck filler panel, full trunk floor, both trunk floor extensions, both tail light buckets, and driver's door jamb. I'm pretty pleased with how everything looked and...

Anyone here ever replaced a drip rail channel on their car? My driver side drip rail is breaking apart on the bottom and I was thinking of either trying to weld it back together or finding a good one to replace the whole thing with. Looking for advice on if anyone has replaced the whole thing...

Yours looks straight to me in that picture. Weird some are straight and some curved up. Maybe years of slamming the trunk on some and not others? Was your trunk damaged in the accident?

The 2 trunks I have for 69 Dart are straight across the bottom at bumper. Here's a photo with a level all the way across.

Beautiful car! Looks like the exact same paint, top, and interior as what mine originally is except my car is a Custom.