Search results for query: *

  1. 7

    Good News!!! (and a question)

    Well you are getting back to it after a long layoff, great to heat good luck with the build!
  2. 7

    kick down

    looks good!
  3. 7

    Check out these measurements for my 8 3/4

    Either way it's a nice score!
  4. 7

    What years of 727 for A body

    so what cars have the 904 tranny that can be used for a 70 dart did the Aspens and other similar cars have them?
  5. 7

    Problem when car came back from shop

    Definately seems like the converter was not filled with fluid, should be fine after the fluid level gets to where it's supposed to be!
  6. 7

    727 or 904

    if you already have a 727 keep it. If your looking to buy a tranny you may have to go with a 904 as the 727's are getting scarce and expensive!
  7. 7

    Shifter Linkage

    Thanks fstfish66 I hope to use the Dart console and shifter. Thanks for all the information it should help me out a lot!
  8. 7

    Shifter Linkage

    Definately worth a try, I have dibbs on the parts for next to nothing and will be able to get them as soon as the snow gets gone and the ground dries out a bit. Thanks everyone for your input and if others have any input on the topic I gladly welcome it as well! fstfish66 if the Aspen uses an...
  9. 7

    Shifter Linkage

    Thanks for the seat info RDJ sounds doable enough!
  10. 7

    Shifter Linkage

    You are right 65barracudadude, what we need is someone who has already tried this to chime in. Anyone have experience with these?
  11. 7

    Shifter Linkage

    Can anyone tell me if a shifter console linkage from a Dodge Aspen will work on a 70 Dodge Dart? What about the bucket seats and rails will they line up or will some fabrication be required? Any info and help would greatly be appreciated on this, thanks in advance!
  12. 7

    Console Install

    Here is the measurements and photo's for whoever else needs them. A - D26 7/16" B - C 27 3/4" E - F 27 3/4" E - G 13 15/16" E - H 7 5/8" J - L 27 3/4" K - M 27 3/4"
  13. 7

    Console Install

    post your email and i will send you the measurements with photos. or email me at [email protected] so i don't miss it!
  14. 7

    727 Trans Rebuild Video

    Thanks, I will have to check it out as i will need one for the future to do an overhaul and possibly beef it up a little whenever i find a 727.
  15. 7

    727 Trans Rebuild Video

    How thorough is the ATSG 727/904 manual?
  16. 7

    Rear went at the Track

    Let us know what you find, hopefully it's not too bad!
  17. 7

    oem 5 speed auto swap??

    I think there are a few members on here who have done it. I am a long ways from that stage yet!
  18. 7

    Transmission "flare-up?"

    For longer than usual times to upshift, or doesn't seem to want to upshift, low fluid and bad filter are usually the culprits. Reving thats a diiferent story, especially since the upshift problem seems to stop after a few shifts. This would be after the transmission has warmed up and the...
  19. 7

    This should be a sticky.(sure grips).

    Thanks for that greta info cudaspaz should come in handy!
  20. 7

    shakes, rattles but rolls

    Are the flywheel bolts all tight?
  21. 7

    Mid console for shifter - conversion from column shifter to floor

    That console and shifter should work providing you get the brackets or fabricate a set to attatch the console with. This is a pic of the correct shifter.
  22. 7

    Did my axle tube twist?

    So the tube just twisted in the centersection? Wow the reverse fixed it where a pipe wrench and piece of pipe wouldn't. It must have been stuck pretty good. Weld the hell out of it now!
  23. 7

    Console shifter linkage question

    Thanks, really appreciate the assistance!
  24. 7

    Console shifter linkage question

    I am looking for the pieces from the bracket that connects to the shifting rod the vertical shaft that goes through the floor and the linkages that are on the underside of the body. Thanks anyway redfastback much appreciated!
  25. 7

    Console shifter linkage question

    Thanks for the info 360scamp. I would have to look at a full setup again to see exactly what you mean, as my memory is a litle fuzzy on this right now!
  26. 7

    Console shifter linkage question

    Thanks for the info really appreciate it. I am on ebay all the time and have never seen these. What did you use for search criteria to locate this?
  27. 7

    Console shifter linkage question

    I am changing my 70 Swinger over to a console shift and was wondering if there were any other body types that would have the setup that would work like an Aspen or something else. Or do the linkages have to be from an A body console car. I have the short linkage that is directly connected to the...
  28. 7

    Tranny Problems

    Sounds like low fluid or filter needs to be changed, or else $$$
  29. 7

    How much to Shorten a Rear Axle Housing?

    How strong will resplined rear axles be? Enough to handle approx 500hp? Is there any offset for a 70 dart swinger. I am moving in the springs to the frame rails so I am looking at shortening the rearend. I don't want to be limited to an A body 83/4 as they are getting hard to find. I may need...
  30. 7

    8 3/4 '70 B-body to Abody

    Hoobatech let me know how you make out as I may be looking at the same swap on my Dart. mopar marc that is a sweet deal, which I could find buys like that !
Back
Top