Search results for query: *

  1. 7

    Wiring Connectors

    Guys, I have an aftermarket wiring harness and I want to use the original connectors but having a hard time locating where I can get the type of bull type connectors to slip in and lock in place for my steering column harness. I've pulled of the side from the original wiring harness but need...
  2. 7

    Electronic Ignition Trouble Shooting Help

    I found this link while trouble shooting my ballast resistor problem and thought I'd pass it along. It has detailed information and lovely pictures to go along with it. Vintage stuff from 1980... Popular Mechanics 1980 Nov Issue...
  3. 7

    Electrical Re-Wiring Question

    How much did you need to cover your wiring? how many feet did you use?
  4. 7

    Electrical Re-Wiring Question

    This could also be a restoration question as well... I am replacing my wiring harness with the EZ wiring kit and wanted to know what you guys used to protect your wiring harness after replacing the old one. I noticed that the original engine compartment used a vinyl non adhesive tape\wrap...
  5. 7

    70 and 71 Valiant Duster Wiring Diagram

    I'm not sure if anyone has posted these, but here they are anyway.... or, at photobucket... http://s15.photobucket.com/albums/a386/rrwallace/duster/
  6. 7

    After Market Wiring

    Well, I'm pretty sure I found the problem. I disconnected the steering column wiring harness and by passed the ignition switch by manually jumping the wires. Basically hot wiring my own car. I got about 11 volts to the coil and the ballast resistor doesn't get smoking hot! I have my eye on a...
  7. 7

    After Market Wiring

    I get about 12 volts to the blue wire but the wire that goes to the coil is about 4 volts. I have all the wires going to the alt disconnected to eliminate it as a factor.
  8. 7

    After Market Wiring

    I'm getting 3 volts at the coil. I am using the standard mopar electronic conversion kit with Accel Super coil. I also have a Moroso battery kill switch with the battery in the trunk. I have good ground from the motor to the chassis as well as from the battery to the chassis. This system...
  9. 7

    coil hook up

    The wire that comes off your ballast resistor goes to the positive side of the coil.
  10. 7

    After Market Wiring

    Guys, I've been battling a low voltage to the coil problem for too long and looking to go with painless, summit brand or hotrodwires.com aftermarket replacement 12 circuit wiring. I'm also looking at going with an aftermarket instrument panel like the 1 that redlinegaugeworks.com sells and...
  11. 7

    MSD 6AL in 71 Duster

    Hey guys, I picked up a MSD 6AL a while ago and was told by my brother that I will need to get an adapter to make my tach work. Also, I see that they sell wiring harness kits for GM, Ford and a universal one... Anyone out there have any input on what would be the easiest way to get this...
Back
Top