Search results for query: *

I have been thinking about doing a vinyl wrap for a while. I have been wondering if anyone has had any problems doing this kind of thing in the past. Thanks.................Ted

Here's the paint for the steering and the torsion bars. It's Rust-Oleum Engine Enamel. The color is Cast Coat Aluminum. I hopes that it helps. Ted

My pal talked me into this. Man it helped. Ted.

Thank you for the reply's. Ted

I'm wondering that paint remover will be ok on these parts. I am going to strip these headlight shells from a Demon. I'm using Rust-oleum aircraft remover. Your thoughts. Ted.

All good thoughts. Thanks a great deal.

I'm in the process of mounting a lift off fiberglass hood. Right now I could use some more info from here on making it level in the rear. Thanks...........Ted

Hi. I have a few questions. First, I'm installing my front and rear windows in my Demon. I can't tell which way to position the steel clips. You can't tell by looking which way is top/bottom of clip. Second, there are holes inside the track on the top, but none on the bottom. Can holes be...

I've painted both of the undercarriages of my cars first with rust bullet and then with their black shell chassis paint. I did my dart 4 years ago and it's still in great shape. Here's a shot of my Demon chassis. I just finished this a few weeks ago. Ted

I'm planning on doing this soon myself so I can use all this info too. Ted

Here you go. Scoop, Barracuda/Dart, 1968, Hemi | AAR Quality Fiberglass Reproductions Ted

I put the bumper from a '72 Demon on my "74 Dart Sport. It wasn't really all that hard to do. Almost a bolt on. Ted

I have a set off of a '72 Demon if you need them. Ted

That's a pretty easy fix. I don't see any reason why it wouldn't work when using the stock spring. Ted

Isn't "A" for the wiper motor? I could be wrong. Ted

I have a few sets that will work for you. I'm not exactly sure but I think it was '67 or '68 when they changed. And I'm pretty sure they were the same up to '76. I'm sure that someone will correct me if I'm wrong. P.M. me if you want more info on the hinges. Ted

I've got a drivers side '74 Duster fender if you need one. Ted

I bought one of those rockers from Sherman's once. What you get is just a section that would go in the middle. The AMD rocker is the entire factory part. There is NO comparison between the two parts. Spend the extra cash and get a real replacement part. Ted

Some really good info here.

I used some cable ties with a mounting hole in them. They take a #10 screw. Its nothing show worthy but they look nice and uniform. You can find them at Lowes or Home Depot. Here's a link to what they look like. http://www.electriduct.com/Mounted-Head-Cable-Ties.html Ted

I also had the same problem with battery acid. It looked like a battery exploded at some point in time. I wound up sanding the entire engine compartment down to bare metal. Believe it or not I found a shade of yellow Rustolium that was a 95% match to the car. I really lucked out. Ted

I'm guessing that you're using the ones from AMD? I had a similar issue with mine. They did not mate up to the quarter panels at all. They both were about a 1/2 inch too long. I wound up cutting and shortening them. My Demon has ALOT of AMD parts on it and this was the first piece that I really...

My '74 Sport had the 5 m.p.h. bumper in the rear. I took that off and installed the one off of my '72 Demon. It was pretty much a bolt on. It looks so much better.

AMD for sure! Ted

In stead of hunting for copper sheet I just took a 6" piece of copper tubing and flattened it out. Then I bent a 90* angle in it so I had a handle. Works perfectly. I also have a few chunks of aluminum. That works just as well. Just a tip. If you can, try to weld from the back side and have...

Make it the same size. Take you time and make it as tight a fit as you can. If it's possible, weld it from the inside and have someone hold a piece of aluminum or copper against the area where you're going to weld. This way your weld comes out flat and there's less time grinding. Ted

I used AMD quarters and the tail light panel on my Demon. Really nice stuff! Ted

I just bought a firewall insulatin kit for my '74 Dart Sport. Unfortunatly it does not include the part that goes around the wiper motor. Does anyone offer that peice of insulation? I cant seem to find it anywhere. Thanks.............Ted

P.M. Sent. Ted

Thanks guys. Got my cover from them last week. It rained all last night and this morning when I checked the Dart was nice & dry. Thanks again for the good info.................Ted