Search results for query: *

Looking for complete bowl vent rod like the one in pictures. Need the spring and washer with it, Holley 1920. Thanks

A member has one on the way to me. Thanks

I have one on the way from another member but that was it. Thanks for looking.

Just need the one rod from carb that goes through the firewall. Let me know if you want to sell just that. Thanks.

That's all I need, let me know what you have to get for it. Perfer to use pay pal.

Looking for throttle linkage for my '65 Dart /6. Need the one from carb that goes through the firewall. Thanks

Another member got back to me and he had all three pieces. Thank you.

I'm looking for the windshield washer sprayers that bolt to the cowl for my 65 Dart. Also looking for the wire air cleaner mount with bolt that goes on a Holley one barrel. Thanks.

I got one. All set.

I don't need the tranny. Would you be willing to sell just the converter?

looking for a early 904 torque converter for my '65 Dart slant 6. 18 spline with the small snout.

I might have one. If I do you can have it for free. Just pay shipping. I'll dig around and see if I still have it. Send me a PM.

Got the pulleys & alt. bracket in from BPE the day after I ordered them!!!! Didn't get a chance to put them on till today. At first I thought I was dreaming 'cause everthing fit perfect and bolted right up!!!(this dosen't happen when I work on my projects).Very clean one pulley setup.came with...

Pulleys & brackets ordered! Now just waiting on FedEx!!

Thanks Joe, I'm just gonna bite the bullet and order them. I'm tired of f%#king around (and I already have high blood pressure!!!)

I think I can use the ugly 4 groove crank pully that's on it right now if I can find a water pump pully that's 3.5" long. Or I could make a custom Alt. bracket that kicks it foward to line up with the existing water pump pully.

Here's what I have. It's a 318 out of a 1986 police car. It is now sitting in my '63 Dodge Panel truck. I mounted an Alt. on it and need pulleys that will work. no power steering,just has to turn water pump and Alt. off the crank. Any help would be great.

I'm looking for a single groove crank pulley and single groove water pump pully for a small block. If anybody has these send me a PM and let me know. Thanks.

Go to www.discounttiredirect.com then click on "tires", then go to "search by tire size". They have several brands of 195/70r 14 tires starting at $62.97 with free shipping.

Thanks Waggin!!!! Motor worked Great!! Now I can drive in the rain again!!!!!

PM sent.

I was going to try to glue it but the teeth are chewed up and missing at each end of the break so I didn't try it. Figured it would jam up again. They're saying no rain for today so I'm driving her to work.

Here's a few shots of the motor. I think it says "Prestolite" on it but it's hard to read.

What I need is the large plastic gear that's inside a 1965 variable speed wiper motor or if someone has a motor that doesn't work I'll buy it for the gear. My Dart is my daily driver and it's been raining here for two days and no wipers!!! Drove my '87 dodge W-100 to work today and the main...

It's hard to believe that of ALL the "A" body people on this site nobody has the side trim for a 65 Dart 170!!!!!!!!

I'm still looking for the trim that runs down the side of my '65 Dart 170 sedan. Need to find these strips before it goes to body shop. SOMEBODY PLEASE HELP!!!!!

Trim width is 3/4". Front fender length is 54.5", Door length is 49", Rear quater length is 69.25". Very simple point on each end.

I did what ya said Lee. I cut the latch section out of my '65 door and used it has a template on the '63 door, Just had to trim about a 1/2" off one side and drill one new bolt hole. Ground down the back side of the wrong location recessed hole. Then when I bolted the '65 latch into the '63 door...

The guy I bought the door from said it was off a '64 Valiant so I guess he dosen't Know WTF he had!!! I just looked at the post Lee Robison had for a '64 rear quater he was selling and it had the same latch has my '65. I guess I'll have to cut the latch section out of my '65 door and graft it on...

Ok,I found out today that my new door is off a '64 Valiant. Can't put my latch off the '65 door on the '64 door 'cause it has different bolt pattern and shape. I think my easiest fix would be to find a '64 latch for the rear quarter side of the door jamb. Hopefully it will bolt up. would a '64...