Search results for query: *

The welding was to make it a sq. flange opening. my porter said this would be a better intake than the vic , wants me to run a 2in spacer. carb is a 4150. i also have a 750 that flows 1036 gas carb i will try. 3300 is with me in it, car ran 11.70/11.80's with a mp 557 cam, same intake unported...

71 sacmp w/ 28x10.5 7.5 bckspace rim w spring relocators.

71 scamp 3300lbs street/strip, 340 +.03 11.6-1 stock stroke, scat h-beam, ross piston measured cc to get comp. edelbrock heads 2.05/1.6 fully ported, flow [email protected] in [email protected] and [email protected] ex, [email protected] cam soild roller lunati voodoo #60434 .600/.600 255/[email protected] dur 110/104 lsa/lcl cam holley...

Scat i beams are better than eagles. scat is 4340 not 5140 have arp cap screws and are 7/16 not 3/8. mike at MRL say's real good rod. and almost 100 grams less weight than stock rod.

I have stock 340 rods with arp bolts been spining it to 7000 for 13 yrs. 71 scamp 344cu.

I say low 11's n/a and low 10's with the nos. i put a 125 shot on my 340and pic up a sec. take the jets nos tells you to use and reverse them nos/fuel to fuel nos and it will really pic up i did that and pic up 3tenths.most plate kits are set up on the safe side and are to rich. run fuel...

hughes has some but they look awful heavy. skirt goes almost to bottom of the wheel.

not worried about the hole trying to staighten the pushrod angle.

that is a spring no. comp no. is 8043 or a 828 is std roller.

I was told to run 120 or 180deg. offset lifters to help with the pushrod angle anyone doing this?

I am putting a soild roller roller in my 340 and would like to know who's lifters everybody is using and why?

go for it. I run a 100 shot on a 340 with a stock bottom dropped a second off et. it's a superpower shot . found out the jeeting is fat from nos. tke the jets and switch them around ex. 57fuel 46nos make it 57nos 46fuel i did this and picked up 3 tenths.and plugs look great.

Any body else?

I am building my 340 up and would like to change intakes. have holley strip dom. on it know wnat to go vic. 340 or super vic.which one do you guys recommend and why? combo is 71 scamp 344 cu 11.6 comp.eddy rpm heads full ported. putting in 2.08 valve. soild roller .665 lift 258/262 dur. 108 lc...

msherd what are you running for springs? they say you can't use superstock springs with caltrac?

sounds like more work than i wan't to go threw.

brian/imm said it would pic up a tenth to a tenth and a half.

i want to switch out my 727 for a 904. how do i id it? was told get a low gear one and does th 6cyl. one fit a small block?

Thanks for the help i got a guy to port the heads and intake and going to put in a 2.05 in valve.

I have a victor 340 intake and would like to get it ported. Who are you guys using and do they flow it or just know there stuff? flow it on head?