Search results for query: *

So I want the 15/16 not the 1 1/32 ?

Thank you 72bluNblu

Ya that makes sense that it would be to short

It says you can use your original push rod?

Thanks Ricks70Duster340 that's what I was looking for

Thanks everyone, I'll look for a stock one

The stock one I have is rusty inside and figured I'd get the newer ones that are plastic and avoid the rust

Merry Christmas, I was looking at the universal master cylinder and they have a 1 1/32 and a 1 1/8 bore does it make a difference which one to get, going in a 74 duster 360 street car? Thanks

Does anyone know where I could buy rear wheel cylinder pins? Thanks

I have a 74 duster with a 66 b-body 8 3/4 rear end, can I use an a-body emergency brake cable, the b-body one out of the drums is to long? Thanks

Will the rear brake cable from an 7 1/4 duster rear ,work in an 8 3/4 b body rear? Thanks

I just got an 8 3/4 rear and can't get the drum off,1 side came off when I turned the brake adjuster on the backing plate, but the other side still won't come off after it was loosened and banged on the drum with a hammer, any ideas? Thanks

If going from small bolt axels to new big bolt axels in an 8 3/4 what do I use for backing plates and brakes? Thanks

Nh 03055

how much?

Are all 67-76 brake pedal assemblies the same (have a 71 duster) Thanks

I did the upgrade on my front brakes to a 73 big bolt pattern and have the calipers facing the rear,I heard I should use the front brake hoses from a volare? is there a certain year? Thanks Mike

I'm istalling new calipers (sliding type) and with the retainer clip and anti- rattle spring there is a tube of grease,where does the grease go? Thanks Mike

If you buy new rotors you send them to mosers engineering products and have them redrilled. mike

I have the kelsey-hayes set up on my 67 dart and going to the larger 73-76 set up,can I use the proportioning valve that's on it now with the 73-76 set up? Thanks Mike

I have a 67 Dart with small bolt pattern disc brakes and want to change to big bolt pattern on the 73-76 brake conversion the calipers are mounted on the front what do you do about the front sway bar? is there a way to mount them in the back? Thanks Mike