Search results for query: *

on my Satellite- the rear of the hood would bow up, @ speed letting air pass under the hood

mine is a AAR/ Stinger drill a few extra holes. the base is used on dirt track cars

"more Doors, " More Fun" Lol

rod7515 It came with the pistol-grip shifter, I bought many years ago.

I was thinking the area on the right front fender, about where the 71-72 swingers emblem mounts mine is a 70 . painting the car soon, rather drill holes before paint.

Where is the emblem positioned on the 4-speed Darts?

have you drained your compressor tank lately ? moisture may be freezing up in the line. when the da slows, un-hook it look inside the air line coupler, you may see ice crystals on body working tools, I only use a drop @ beginning of the day other air tools, may get 2 or more drops of oil

here's one place (never bought from them) Stephens Performance 2010 1970-71 Dart Front or Rear Bumper Guard Cushion Part# 109-HA11P Price: $25.95 per pair

find a trailer to practice on..

this 70 Dart- both hoods from Stinger

I can't close a stock flat hood with the carb, intake and breather I run on the Darts. The Rampage -flat hood won't close > lowered body onto tube chassis

its to dark out now, maybe tomorrow

has a contour to it/ Not flat. also has about 1/2" turned back on the bottom No Numbers anywhere From this car > had a rough life > am restoring motivational pic ...

This was found in the Trunk of a 70 Dart Swinger Don't know if it is Factory I haven't seen one on a Dart I could see holes where it was bolted to the lower Valance, in front of the lower radiator support > 28" x 3"

X2 Fit very well> even when I modified the trans tunnel to fit a 518 trans

i was using a prop rod, that always seem to get in the way, when working under the hood Time for something different, (not for everyone, but works for me) and the wind won't make the hood fall I drilled a hole in the hinge, welded in a tube with a 3/8" i.d. also drilled a hole into the fender...

what is the correct material to use between the inner fender and the under side of the fender where they bolt together. putting the fenders back on soon thanks

I have AAR hoods on my Darts I use Dante's hood pin package They look just like the Factory 70 340 Dart I have pin plate is Raised/bevel , Not just a flat disc. and a gasket under it here's the link> Doesn't show for "A" body but they are all the same except for Lanyard length just tell...

do you know about the nut under the fender, at the rear sometime hidden, due to the splash shield ( metal part on right> is upper door hinge)

Thanks, for the Compliment Tony, I have found differences in shields, that make fitting, fun I'm going to attempt to salvage a old, broken post of mine. CSI vs TCI http://www.forabodiesonly.com/mopar/showthread.php?t=276915 does one fit better than the other ? haven't measured or fitted...

70 Dart custom (more door) small block/727, with shield had to raise the floor 72 Dart Swinger Big Block/ 518 with shield Knew I had to raise the floor at the cross member area.

I see you are in Florida Have you looked at AAR products? They are in Titusville would save you some on shipping

A Must read post very talented guy http://www.forabodiesonly.com/mopar/showthread.php?t=212719 Page 16 half way down shows the piece of quarter cut off, Then, re-welded to get the quarter on

I guess, I do it backwards lol I place the welding spoon on the outside of the car http://www.harborfreight.com/catalogsearch/result?q=welding+spoon for the ones i can weld from the inside> remove door panel, fenders, there is only a few near the wheel well that is hard to get to less...

Thanks, But I can't take credit for it Gayle applied the paint with a brush after she did the headliner.

Here YOU GO.. Can you see it (texture)> close enough for you???? I didn't have any close ups , posted what I had So, Just for you went out and got this one. The link WAS to SHOW> available colors

we used a black "Hammer Tone" paint on our Dart, cause we didn't want a regular vinyl top on it check the link below.. https://www.google.com/search?q=hammer+paint&es_sm=93&tbm=isch&tbo=u&source=univ&sa=X&ei=bsigVJu_LtHkgwS9qYHADw&ved=0CFAQsAQ&biw=1024&bih=743

rock auto sells them also

anyone sell lower back half quarter panels patches > 72 Dart Swinger All i'm finding is full or half panels Hate to buy half panels and ONLY use half of it LOL Thanks reason for hauling it on the trailer backwards No eng/trans and >>NO hood latch assembly..