Search results for query: *

I did forget about that. Thanks for the reminder.

I think if I go forward with this, I will get a complete dash with everything in it. That way I will have all bases covered.

Most likely I will need the barracuda dash harness. I know the frames are different where the gauges mount. Wonder if the lower mounts are the same?

I saw a 67 Barracuda dash in a 67 Dart. I always liked the round gauges the Barracudas have. It's obvious the dashes are the same size but are there any differences in the way they mount. Anything to watch for should I decide to do the swap?

If you are still using leaf springs. Run the rear tubes from the main hoop, through the rear package tray and down to the frame, just past where the shock bolts are in the trunk. You don't need to cut access holes in the roof. What style of cage did you pick? 6,8,10 point?

I don't know what they were doing. 7-8 years ago when I was doing this, I bought the competition engineering brand cage. It was way short everywhere. Put the main hoop in the car and my helmet would stick up over it. It was way short of the roof. I am only 5'8" and seat was way low. I would put...

S&W Race Cars VOL 34 SWPG Catalog Web These are great cages. I have used them before. They fit close to the roof and tight to the sides.

Here is my radio on his YouTube channel.

I will do that

Just got it back. I will have it installed this week. Here are a couple links to the guy that did the conversion. He makes a YouTube video of every radio he does. R and B Vintage Radio Home richard blankenship - YouTube

Had a factory radio converted from AM to AM/FM, AUX, 45 watts x 4.

It doesn't. I plan on getting The roof mounts from a later model dart and installing that in the car. Anything else to look for? Any comfort issues across the shoulder?

My 67 Dart only came with a lap belt. Darts built from January 1st 1968 and up came with lap and shoulder belts. Does anyone who has used this setup have any complaints about it? If there are issues, what could be done to remedy it? What would you change about it?

I have bucket seats in my 67 Dart. I would like to add some sort of armrest/drink holder between the seats. I want it to fit snug, but also be removable. Just need it for long cruises. Lets see what you have in your car. Seems like I have seen some posted on here in the past, but I can't seem to...

http://www.forabodiesonly.com/mopar/showthread.php?t=129759&highlight=dual+speaker+bracket Mopar 1968-69 Dodge Fury GTX AM/FM / iPhone conversion radio - YouTube Here is his website. http://www.randbvintageautoradio.com/RandBVintageAutoRadio/Home.html

Buy a new wheel in black, take it to your local paint shop and have them paint it the color you want and clearcoat it.

VDART is correct. I have a 67 Dart and the speedo went bad. I found a cluster from a 68-69 dart and put it in my 67 dart and bought the 68 and up speedo cable and was good to go.

That is good to know oklacarcollector. Now I don't feel so worried about whether or not I can get it matched. Guess I will be calling them monday to see what they can come up with. Thanks fellas.

They are the ones I am wanting to buy from. Thought I would get some info here before I call them.

Legendary

I have a 67 Dart that was a factory bench converted to bucket seats. The front seats I have are '73 model bucket seats. They need new foam and covers. The factory rear seat also needs new foam and covers. If I decide to use the '73 style covers for the buckets, will the '73 Dart rear seat covers...

Here is a link to a company that sells new speakers for old cars. They have the Mopar 4 x 10 speakers. If you are using the factory '67 radio you might need to make sure the 3 1/2 speakers are compatible. The 4 x 10 is a 8-10 ohm speaker and the newer speakers are 4 ohm. I have read that the 4...

Check out these links, looks like good stuff. http://www.kbs-coatings.com/epoxy-putty.html KBS NuMetal - Epoxy Putty - Steering Wheel Repair - Part 1 - YouTube

How much trouble would it be to swap a thumbwheel radio into my 67 dart. I have also noticed that the temp controls are different. Wouldn't mind keeping my style radio but it doesn't work very good and it is difficult to find a good working one and I don't want to spend a fortune trying to fix...

I started a thread about thaty awhile back. Everyone that posted on it said the plate that had to be installed was junk.

Has anyone here put an E body slap stick shifter in an A body console?

Lots of info in those links. Thanks.

I am installing bucket seats and console in my 67 Dart and need some measurements of where to weld in the brackets for the console and shifter. Does anyone have a 67-69 Dart apart right now that they could do some measuring on?

I wil probably have to get the later pad, because I am sure it will be about impossible to find a good 67 dash pad.

Thanks fellas. I thought I had one of those 1 year only dashes or something. Wheew, close one. The front end rebuild is bad enough, has a few special parts on it.