Search results for query: *

Do you have any fenders for your Cuda at all? They do make a repair panel for the lower dogleg if thats what your problem is. One pair I have were repaired with them but not properly. Upper rails are good though. I know what you are going through.

Nothing available that I could find. Ended up getting a used pair from someone that use to be on here. Were sposed to be good but were junk. $500 down the chitter. BE CAREFUL

I have a couple that I think are OK on top. Where are you located?

I have my cuda pretty much all stripped and primed. It had the original primer and paint plus primer and recoat w/enamel. A real PITA. I sanded and used stripper. I am down to the cowl and need to know if there is a way to do the vent part without distorting the painstakingly straightened vent...

OK thanks. I can handle that but it sure seems like re-assembly is going to be a bear.

I have the door disassembled all but for the vent window frame. I took the bolts etc. out that appear to be holding it in but it will not come out. seems something inside the door holding it. Am I missing something? Nothing in Haynes manual. Should I stick to motorcycles and woodworking?

Thank you

I am working on a 68 Cuda vert. While stripping one of the doors it occurred to me that I don't know if the black on the inside of the door should be painted before the red on the exterior. Does it matter?

I got the frt. driver side floor panel through them for my 68 cuda. OEM thickness steel. It had 2 slots about 5" by 1/2" cut into the top of the section for reasons unknown to me.

Yep, the corner is rotted out. Strangely enough it is real good all around it. I recall seeing, at some point in time, a piece of fabricated steel that would work to weld in but my poor feeble old mind can't come up with where it was. Cab corner for a truck? Who knows.

No, sorry. My antique digital camera **** the bed and I haven't got a replacement yet. Pike-the photoless

Hi all Working on my 68 cuda vert floors. The rear floor corners (under the back of the rear seats) are rotted right in the corners, about 4" square. Very solid aroun the holes so I would like to just cut out the affected area and weld in new corners. Problem is I have no way to fab new corners...

OK I got it. The fasteners I was looking at were the snaps. I needed better light. Who the heck came up with the idea of stapling metal? Looks like when I get that far I will be looking to a trip to the Auto Top Shop. Now to figure out how the rest of the top is fastened. Thanks much for the...

I will try get a pic tonite. Somehow. Thanks Pike- the technically challenged

am working on my 68 cuda convert. Have moved to the top and need to remove it. The fasteners that hold the fabric to the sheet metal around the trunk section are something I have never seen before. Anybody know what these are and what kind of tool I beed to r&r them? Thanks for any help Pike-the...