Search results for query: *

Maybe your tires are old,as in sat on the shelf a while before you got them,or you need a different brand.Actually,id tell them to do their job and quit whining.Sounds like the combo is working perfectly together.

Ive got 3 or 4 good 7.25s you could have,an one of them for sure is perfect.Its still in my 71 dart im driving now,with brand new drums,shoes,wheel cylinders,and hardware that somebody installed before i bought the car.I just drove the car on a 300 plus mile trip and the rear seems...

you need a haynes manual or something similar for the clearance specs,but i use lucas oil in mine for oil,and it steers like powersteering

what size wheels are those on the rear?and what did you have to do to the body to fit them?

Yep,its no biggie,just wack off the unwanted indicator,and shifter arm stub,and fill in the holes with kitty hair(its evercoats brand of fiberglass strand putty)then a light coat of finish putty,primer and paint,no one will ever know you had an auto column.I dont know how easy it would be to...

If you have old ss springs,how can you tell?Is there a part number stamped on them or something?My 71 dart sits high in the rear,wich is fine,but it made me wonder if it already has ss springs.I also bought a used set,that were suppose to be ss springs,but they are rusty.

or will a manual mustang 2 rack work for this?

what else had to be done to make it all work?

These have the most back spacing i could find in this style wheel for ya.Not sure what tire rack price is,but maybe you can compare for yourself. http://store.summitracing.com/partdetail.asp?autofilter=1&part=CLL%2D045107540&N=700+400056+323323+4294755847+115&autoview=sku

http://store.summitracing.com/partdetail.asp?autofilter=1&part=CLL%2D065117540&N=700+400056+300312+115&autoview=sku

for when i go to see jasons car,lol

maybe the wheels we had on the 70 were 15/10s,i but i know they had 7.5 or so backspacing for sure.the were close to the fender lips,but i think that was because of the tires we were using.It was over 10 years ago.I wasnt sure they were still making these in small bolt that wide.

but i think that will work

were 15x9.5s with 7.25 back spacing,and 29/12.50/15 mickey thompson et streets.

http://www.centerlinewheels.com/wheels_fitment.php?mw_id=34&sw_id=371&size=i_15 x 9 in the 4 inch bolt pattern.Thats what we had on the 70 dart i built,it had the stock width a body 8.75 with small bolt pattern,and was minitubbed.You may can call centerline and see if they still offer the 15/9...

you do have to have uppers from a 73 up a body though.you can use disk spindles from a 73 up b, or f body,BUT,they are taller by about 1 inch,so its gonna throw your suspension geometry off a bit,unless you lower the ride height,then the geometry comes back to were it should be.If you keep the...

for get about that truck dana 60 idea,unless your planning on lots of power,like over 500 horse power.Sure,it would be bullit proof,but they are very large,very heavy.Thats a lot of extra weight to carry around,and the 9.75 ring geartakes a lot of power from the engine just to turn it.Im in nc,i...

they went to upper ball joints larger in 73,but im sure thats not the rule for all 73 up cars,because the factory used up what was left on there shelves.The k frame changed too,of course,to spool mount type.

switch back to rubber bushings,the squeak will go away,lol

dont let anybody tell you they never wear out either.Ever bend a piece of wire back and forth?eventually it breaks.torsion bars are made of spring steel,but after years of flexing back and forth,and carry the weight of the car,they were,or lose there spring.MY 73 dart wont even hold the slant...

gonna need a puller

they offer different kits than this,depending on what youre looking for exactly http://www.mpbrakes.com/products/product-detail.cfm?product_id=239

they have everything you need www.masterpowerbrakes.com

i didnt remeber the a body calipers were mounted towards the front,but i put the doba brakes on the same way they came off.The original brake hoses were towards rhe rear on the drum set up,and towards the rear on the disc set up,so i planned to order hoses for a 77 cordoba.If they would be...

The way we always set up for rear end placement i nthe willys hot rods was to place the wheels/tires in place under the wheelwells,exactly were they go,front to rear,side to side,etc,proper ride height.Then is a simple measure ment from wheel to wheel.At that point,you call moser engineering...

Personally,i like the look of the bfgs.The tread pattern is cooler looking to me

I have noticed over the last 4 months that most darts like mine,that havent been restored,have sagging rear springs.Ive looked at a bunch of dusters,and 2 dart sports in the junk yard for a 8.25,or 8.75 rear,and none of them seem to be saggy in the rear.Are there different rear spring rates from...

man,that thing looks very professional looking!i love what youve done to it so far.post pics of the mini tubs when you get them done,i cant find enough pics of mini tubs,i want to do my own.good luck!