Search results for query: *

Thanks

Thanks, wasn’t sure cause I bought these inserts for the spindle that allows you to keep small ball joints, but wheels are out of wack ( alignment)

Does anyone know if there is any difference in 68 - 74 A arms beside the ball joints ( shape, size length)

Has anybody removed the front fender wells ?? If so is there anything that has to be done to shock towers ??

Thanks for the help, I'm going to change the lower ball joint first since its rather easy to do , but can you tell me why the tire didn't lean with the old drum brake n spindales ( 9" brks) Question, do you think its worth the trouble I'm going threw just to have disc ft brakes ? I feel...

No I haven't < but if I didn't change anything why should it need to be aligned? tire was not leaning with the 9" drums so why would it lean now? also why just the left wheel? ( I changed the lower ball joint , but same problem! ) also why is there no lean when backing up ? now if the lower...

ok I replaced the upper ball joints , used a shim fo the controll arm didnt change them . got this from the diff doc. also didnt have this problem when the drum brk was on car . there is some play in the lower bj , I plan to change it out , but dont want to spend the cash untill i find out whats...

where do u buy kriol ?

local parts store for the ball joints,

I used a pipe wrench works great !!!

I have a 68 ply val that i converterd over to disc brk , doner car was a 73 duster , got it all done but the left front tire leans in at the top ( new ball joints was used )changed aA arms too. keep the lower ball joint that came w car ( 73) funny thing if you go backwards it straightens out ...

Need help guys !! I converted my 9" ft / bk to disc my car is a 68 Ply Val olk I found a donor car not to sure of the year it was a Duster disc brk 4.5 bbp just what I wanted so I bought complete brakes ,rotors spindles etc. However I found out it takes a lager upper ball joint ( I didn't get...

Let me explain I have a 1968 ply val it had 9"drum on ft / I changed it over to disc bought everything except upper arms only to find out the spindel takes a bigger ball joint so now I'm stuck cause the new joints are to big for my control arm need help any ideas? Can I shim the shaft ? Can't...

The vech is a 68 val , I didn't change the UCR ! Just when I put it all together I noticed the ball joint itself was loose I have bought a new one to put in but just wanted to know if that was the problem or not before I go and change it ( the rt side is fine ) and when I look at the B J its...

Hi guy's n gal's Have a problem! I converted my ft/ brk to disc that I got from the bone yard form a 72 duster I bought the hole deal spindles rotors calibers lower ball joints complete ok so put them on fit good found out my left upper ball joint is very loose ( didn't change it yet) however...