Search results for query: *

I'm looking for a photo of the OEM seal, I know I have one in my hoard but searches has not turned it up. I forgot the vent mounts different than the heater box, so I'm looking for heater box seal photos Thanks

I may have mentioned this earlier in another thread but I recalled another member was going from AC/PS to Alt only so I thought I would post this info here. The 4 groove crank pulley is 4 layers thick and uses a longer bolt. Those longer bolts hits the timing cover. (I discovered this during my...

(If I have mid represented something let me know) I'm new to Big Blocks so I'm learning as I go along. I mapped out the water pump passages on the pump housing. Water inlet to deepest part of housing (pump suction side) Pump output (lower passage on back side) to drivers side of block...

Would there be any interest in me making an AC delete plate. The each price to have them made goes way down the more I order. Each will come with a gasket and mounting hardware. Also they are Made in the USA! This but with our the holes Let me know MODS... I'm not fishing for sales, I'm...

On a 383 NO AC, NO PS with factory single groove pulleys is the clearance between the wp and crank pulley almost nothing? I have what I believe to be factory factory pulleys, they line up perfectly, they measure the same as the 440 source Alternator only crank and water pump diameters. But...

I'm making a Heater Delete plate to go on the firewall. The only photo I have seen, seems to look like it as a domed area in the center of the plate. Can anyone with an OEM heater delete plate confirm the dome. I know Mancini Racing has one but I'm looking to make an OEM correct version with...

My latest endeavors are a factory looking plate to convert an AC Firewall to Heat Only and an OEM style Heater Delete Plate. I will update when I have progress. AC to Heat Only Adapter Plate The AC firewall has a much larger hole for the motor Heat Only Firewall The plate will have...

So I'm making a plate to cover the AC hole in the firewall to mount a heat only box. I have all the holes and mounting points located BUT there are 4 small holes that I have no idea what they are for? The holes are not evenly spaced around the center circle like the mounting holes are AND they...

Hi all, My latest part is the plastic slider on the 68 up heater control. (I already make replacement pins out of aluminum) Broken OEM Reproduction (black for now but will be White in the future) My limited testing shows them to work well BUT Im in need of some guinea pigs willing to...

67 A Body Heater controls have a Nyloc nut to remove the plate. Note the spring washer. 69-76 Truck Uses a metal spring clip with a keyway to remove the plate. 68 to 72 A Body Used a plastic clip. The pin replacement is the same for all 3 types. 68 up photos and procedure courtesy...

Hi all, Another member is in need of heater control pins to replace his broken ones. I can have them made in Aluminum, but I need one to get measurements from. It can be broken as long as the pieces are there. The other member is going to try and get me dimensions but if anyone has a 67 up...

This is NOT a for sale ad.... I'm just looking to get an idea of the value of these parts My latest dart is a factory AC car. I like to keep things simple so I'm converting it to heater only car. I'm not sure I will sell the AC components or just store them but I was wondering what the parts...

Hi all This 67 dart convert is my first Factory AC car. I want to remove the entire dash as a unit. I expect I will need to remove the registers attached to the bottom of the dash frame first. Any and all advice is welcome. There is no refrigerant in the system or coolant lines from the...

A friend bought a water pump gates 43030. It has 3 ports by the bypass And the gasket shape is different. The applications say they are for the same engines Thoughts? Gates 43030 Typical cast wp Gates 43030 gasket Typical gasket

I got the shroud prototype today. Really good fit. This week end I will check it for fan to shroud fit. Unfortunately it was delivered broken on one of the build lines. I'm in contact with the maker. The packaging wascsub par.

As some may recall I reversed engineered (from measurements and photos) a 67 (one year only) V8 fan shroud, well I bit the bullet yesterday and sent the file off to be 3D printed. Prototyping large pieces is EXPENSIVE! When I get the prototype, I will test fit and make adjustments. If there is...

I have had this perfect condition NOS 67 Dart V8 Fan Shroud hanging in the rafters of my garage for years. I have decided to clean out and cut it up into bits sized chucks that will fit into my trash can. Ok Ok get out the paddles and zap your heart back into sinus rhythm. Really what I am...

Hi all I noticed the ad for a cracked fan shroud. I have seen the listings for the same shroud from the aftermarket, and it always excludes 67. I know the rad changed a some point from a rounded top to a square top, but it doesn't look like that happens in 68? So the question... Will it...

I was looking to see if there was an electrically controlled mechanical fan clutch. Like an AC compressor, and I stumbled on the info from Hayden...

My daughter has been mentioning that her Jeep GC takes forever to warm up, very slow to defrost, etc. I suspected a stuck open thermostat She drove here (about 50 min) on the interstate. Then about 10 minutes on a 45 mph road. The second she arrived she popped the hood and I thermal temped...

May be rebuilding my heater box in the next few months, current core is the OEM as far as I know, and is not leaking. I know replacing it is a good preventive idea, but if the OEM core shows no signs of seepage or being plugged it seems like the older sturdy made one might be better to be kept.

I needed to see if I could get my fan motor rebuilt. Most DC motors are fairly simple so I decided to disassemble one to see what is repairable / replaceable by me. This motor says it is from a 68 A-Body A markings on the side read: 12V 15290-01 2837678 1558 build date??? 1558 155th day of...

Bad fan motor bearings or brushes? The fan makes this sound in low speed, when in heat or defrost it doesn't make it as often. With the heat / defrost lever in the full left( closed) position it goes crazy. I'll look In my FSM but can the motor be removed with out removing the heater?

Just installed a Real Gasket RG-53063. 20-25 In Lb is so little I did not recognize the click in my inch pound torque wrench. Had to clamp the extension in a vise to realize that the slight "thunk" at barely a few degrees of a turn turn was the wrench "clicking" I thought the 1 year old...

Anyone have a problem using wire clamps? I bought kit DC004 66-69 273-318-340 Hose Clamp kit 6-7 months ago, just put them on with a hose change. The kit came with 2 radiator hose clamps, 1 t-stat hose clamp, one water pump inlet hose clamp, 2 bypass hose clamps, and 4 heater hose clamps. Two...

So I decided to relocate the alternator adjuster bracket to the correct bolt. Figured it would be as easy as remove one bolt, loosen the adjuster bolt on the alt. remove the correct water pump bolt, swap the bracket over, add some anti seize to the threads and reinstall the bolts. NAAAAA...