Search results for query: *

  1. W

    power steering pump

    I have my 72 Demon jack stands , with the engine not running I turned the steering to get the wheel out of the way and when I turned back to center fluid pushed out the cap . The last time I serviced the pump I serviced it to the cold and ran the engine and it was at proper level hot , any ideas...
  2. W

    Power steering fluid cooler

    Has any one installed fluid cooler for your power steering. Waco Demon
  3. W

    Power steering box locks up at low RPM

    I took my 72 Demon in yesterday to get an alignment after it was done the steering box locks up at low RPM . The steering is real hard once you increase RPM the steering will turn ok but when you slow down it gets real hard agene Thank you Waco Demon
  4. W

    LCA pivot shaft

    Has any one installed PST's LCA greasable pivit shaft's . I installed a set about two years ago I was not happy with them Waco Demon
  5. W

    Lower control arm pivit pin

    I installed the lower control arm pivot pin and bushing from Performance Suspension Technology . Now with the strut rod and bushing installed the lower control arm dose not go all the way on the pivot pin . About 3/8" gap control arm and K frame Waco Demon
  6. W

    Cap Auto Produckets

    I have been doing a search for Cap Auto Produckets . All the posts are from 2007 and 2009 . I am looking new pro's and con's . I'm thinking about puting there K fram in my 72 Demon . Waco Demon
  7. W

    1972 Demon Upper Ball joint

    Can not get nut brock loose on upper control arm ball joint . Have any ideas. Waco Demon
Back
Top