Search results for query: *

So i have converted to a performer intake aand carb, the original EGR valve is to big for the clearance needed to put the orig. EGR valve back. any suggestions on how to get around that? oh and where do you find a EGR gasket that fits? autozone didnt have it and neither did the dealer.

what size line is the vaccum from the distributor to the carb on a 318 motor?

i just bought this lightly used 1406 edelbrock carb from another FABO member and the part that is there stock on the linkage that the lokar kickdown linkage connects to appears to be shaved off...no wonder i was having problems hooking it up! so what do i do now? i dont have a welder fyi. would...

i have been working on my carb/intake for about 2 or 3 months now and so of course the car has sit for some time with out being run. should i put anything in it upon start up?

i changed my carb and intake. I am going to change the fuel line from the pump to the carb. what was there is not long enough. should i just run something like this kit: http://www.summitracing.com/parts/EDL-8135/ what is everyone using for fuel filters and line?

So here are a few pics of the carb/intake that i got to put on the dart. this is my very first experience with any older cars and carbs and what not. so i need u guys to walk me through hookin this stuff back up. im not real sure what goes where...i know sounds stupid. I do have few issues...

i have a 318, changing over to a 4 bbl intake and carb an i just want to make sure im getting the right thing to finish this. what is everyone using for gasket/spacer between carb(holley) and intake(performer) combo's. car quest has a kit that includes spacer, gasket, studs for like $40. just...

so i am changing a 2bbl to a 4bbl performer intake and holley carb on my dart. now when i took everything apart there were 3 intake bolts that were shorter than the rest, are they crappy replacement by the previous owner? if not where do they go? and if not should i go to a junk yard and pull 3...

hey guys lookin into buying a lightly used 1405 or 1406 600cfm carb for my 4bbl intake and carb swap (already have a performer intake). those who have them do you like them? would a holley or older carter work better. let me know positives or negatives on it. thanks. also whats a price range for...

i have a 318 and i am swapping my 2bbl to 4bbl. i have a perfromer 4bbl intake and a old holley carb and a felpro intake gasket. i know i need a gasket for the carb to sit on the intake but does anyone have any suggestions for a certain type? also, what else will i need to complete the swap...

I have a 4bbl 318 with a performer intake, holley carb i am going to go with a mild cam...pretty basic stuff. my question what type of gas should i be using? should i be using an addiatives? if so how often?