Search results for query: *

I know it has been asked (and I have asked) and I have searched and found several examples of dimensions, here on FABO and one the net. BUT... None have certain crucial dimension Many are not from a KNOWN OEM front fender The reason I'm being so picky for KNOWN OEM fender is there are so...

Updated with photos and videos NOTE: This review is just that, a review. I show the good and the bad and my satisfaction with the product. I'm not bashing the manufacturer (unless their product sucks) just stating facts and comparing an OEM part the the reproduction. In an attempt to get my...

I have a question for the gurus. What do you do in this location. Red box Admittedly I have not looked close enough at it. But it looks like the floor is sandwiched between the front of the torque box and the firewall.

I was on my way to the Pikes Peak International Speedway for the Hot Rod and Rumble Car show last Saturday morning. I am doing 65 in the right lane of the 2 lane interstate I25, 25 minutes into my 3 hour drive. I look in my rearview mirror and see headlights fast approaching, "he will go around"...

FIRST.... Please please please I do not want to get into the pros and cons of dipping a car. My question is... Would it be better to dip the car then replace the bad sections. Or replace the bad sections then dip. Car... 67 convert Needs at minimum Driver's front foot well Pass...

A couple years ago I stumbled on a rocker trim clips for 64 Ford Galaxie. 67 Dart GT Rocker Trim Clip Substitute (this post has dimensions in it) It looked like the 67 GT rocker molding trim clips so I bought one. It measured almost identical. I lost track of the company I bought it from...

I pulled the hood hinges from my Rescue 67 Dart Convert. There was no hood on it so I don't know how well the hinges worked. After stripping the hinge pins seem really loose. Question... How tight should the hinge pin be?

It came on a door I bought and I don't need it. I would say it is better than driver, no corrosion, no dents, very straight. IMHO 0 to 10 0 = un-restorable 5 = driver quality 10 = NOS I would say it is an 7-8 Looks like corrosion but feels more like mineral deposits Curvature matches...

Not looking right now but I will be in need of a drivers side rear quarter glass for the 67 Dart Convert my daughter and I are saving. So the question of the day.... Is the Convertible quarter glass the same as the Hardtop? Ultimately I'll be looking for tinted and preferably with the AC...

Hi all, I was looking for lower quarter patch panels and found 70 to 76 but not 67 to 69 This is for a 67 dart convert. I seem to recall that the wheel opening changed at so e year or duster vs other body style. The steel above the blue tape is solid, and I might not need to go as far...

Hi all, Need a difinitive answer... Is 67 Dart Convertible windshield glass the same as 67 dart 2dr hard top? A friend bought glass for his 67 dart convert and when placed over my 67 dart convet glass it seems too small.

Very interesting Wonder if it would work in floors where there are small pinholes or even larger holes?

This is my latest project. 67 Dart backup light housing Once proved out, I'm going to have it printed in metal. This is just the initial body of the housing. I have the attachment studs and lense attaching holes to do The dimples on the back are from supports. Ridges on the front are the...

Hi all, Is the quarter glass on a 67 Dart Convertible the same as on a Hard Top? Thanks

2 years ago my Taurus was parked in my work parking lot. I came out to go home and found this.. I finally got it to my favorite super talented paintless dent remover. What dent! (Same car I swear!) If you are in the Northern Colorado area PM me for his contact info.

I have not tried the clip on the trim or on the car, but I would bet the cost of enough to mount the trim to the rocker that they would work. Search results for: 'Rocker'

I stumbled on these clips... (Note: the new clip is for a Ford Galaxy) The measurements are a tad large but who knows where they measured it. looks almost identical. I'm buying one and will report back with a comparison to an OEM clip.

Anyone have their 67 Dart GT rocker trim off? I'm looking for a few dimensions. Diameter of the holes in the body the clips go into The hole diameter ( I think is 1/4 maybe 3/8") I would have to pull off a quarter trim to measure and would rather not disturb the trim made from Unobtanium if...

Does anyone have a recommendation for what brand, color, texture argent paint to use on 67 thru 69 dart grills?

Hi all. I have a line on a NOS lower windshield lock strip. 2811 904 (for 67 hard top) My 67 convertible calls for 2839 148 In the images it looks very much the same but I have not asked for dimensions. They did offer up 1 dimension and that is the length, which is longer than the width...

Admittly i did not do any searching on FABO for the answer, i did look on google for the parts and it seens thay are compatable 67 thru 76. Is the door lock mechanism, the part that latches to the strike post, the same 67 through 76? AMD has this but lists it as 68, no listing of 68 thru ???? Etc.

Year one claims to have the kit in stock FD32230

Ok paint gurus... I have a paint delamination issue. On the rear quarter, the factory paint (2007) started to delaminate in a small (quarter sized) patch. I put some touchup paint on the spot 9 months ago before my daughter took the car to SD to school. When she got home for the summer the...

There has been talk in the past about fender / bezel interchangeability. So I picked up one of each (Bezel that is) Bottom to top 67, 68, 69 69 on top of 67 69 on top of 68 67 on top of 68 The 69 Headlight hole is in a much different location then the 67 or 68. The 67 and 68...

Well tomarrow, weather permitting, I'm off to the welder to get my trunk hinge supports on my 67 Dart Convertible repaired. In the process I took the trunk lid off and took the hinges off. (Discovered you have to remove 2 screws from the tack strip as they trap the hinge on its post) Well 53...

I need a buffer to cut and buff the oxidized 35 year old paint job. I tried a HF special, what a joke. I use to have one that had true variable speed, and that's what I'm looking for. The HF special was variable but always started at full speed, apply a little pressure and it would slow down...

Bought a mirror to see if it would be possible to modify it to be a remote right hand mirror. Probably not! Mirror, (glass removed) Disassembled Back of mirror holder (note the colors) Cables pass thru the trim Cables pass thru the mount (there is a plastic tube around the cables...

Asking for a friend... Anyone successfully un-taco a 69 Barracuda hood? Not creased on the outside. Surely the inner supports are. What do the go for un rusted, un molested?

Has anyone bought and used the AMD door hinges? What do you think of the quality, fit and finish? Any thoughts if AMD makes them or are they reselling someone else's Thanks

Anyone can confirm 68 barracuda and 67 dart convertible trunk hinge are the same or not. Not the body mount but the J shaped hinge that goes into the trunk deck lid. Thanks in advance. Answered in Al's post Deck lid hinges