Search results for query: *

Hello Gentlemen! I have some Edelbrock heads that were bought and ported by Hughes Engines but don't know whether the Springs are Edelbrock or not. I bought them a while ago from a Fabo member who never used them but cannot get hold of him to check and I would like to purchase a Hughes...

Anybody tried these before? Fit Mopar Dodge Chrysler La V8 SB 318 340 360 Retro Fit Hydraulic Roller Lifters | eBay I'm looking at a late model LA360 with roller lifters and cam. Any recommendations on lifters that are good and won't brake the bank?

Hi All, I have the option to get my hands on a TBI LA 360 which I would like to use to put my Hughes ported Eddy heads on plus extras and eventually new roller lifters and hyd roller cam. Are these engines any good? Thanks Brett

Hi everyone, What are your opinions on manifolds for an EZ-EFI street going 360 stroker with an EZ-EFI? Single plane or dual like an Air Gap??? With a solid Hughes cam with a sweet spot of 1800-6100 Stage 3 ported Eddy heads any ideas??

Spiro Valves anyone had any before, recommendations, stay away froms? Thanks B To replace my 2.8 and 1.6 valves for my Edelbrock Hughes ported heads

I wanted to ask: If I build an engine with an internally balanced crank, an internally balanced damper and flexplate, what happens to the balance when you add a custom crank pulley? I live in Cape Town and it's probably easier to have my pulley system machined to the sizes I want with all the...

Hi all, Do I have to use a Mopar distributor bushing tool for my 360 block to fit the brass bushing? If so does anyone have a spare/secondhand for sale-with my exchange rate from South Africa and no stock here it's so expensive. Please let me know! Thanks, Brett

Im curious what the top speed of a SB 408 might be, forged internals with H beams, Air Gap, Solid Flat tappet 246/252@50 with 600 lift, Dana 60 3.54 gears just an average idea?

Hi all, I have a very dirty '72 360 LA block and wanted to know a few things. What is the best way to clean the block inside and out? My dad has a high pressure hose and high pressure air hose on his farm and I don't want to pay a shop to do what I can. It will go to check everything is...

An alternative to Moroso deep pans and Milodon pans. I plan to use mine with an Alterkation setup. US230 from cnc-motorsports.com Just have to order the right pickup now!

Hi all, I just ordered myself a Kevko Sportsman 360 pan on ebay. I know a lot of guys run the stock Kevko pan but was curious if anyone has this one that I ordered...

Anyone heard of PEP or Precision Engine Parts in Las Vegas? Falcon on ebay has connecting rods made by them in the USA-they seem to make a lot of stuff. http://precisionengineparts.com/...

Anyone heard of PEP or Precision Engine Parts in Las Vegas? Falcon on ebay has connecting rods made by them-they seem to make a lot of stuff. http://precisionengineparts.com/

Anyone ever used Race tec/Auto tec pistons???

please see above Thanks, Brett

Hi everyone, Is anyone using K1 forged 4 inch 360 cranks? campbell enterprizes has them on special for USD695. I have been recommended Mopar cranks as I can then use con rod or so I have been told. Apparently you can't mix and match with Scat and Eagle. Is this true??? The car is a street car...

Looking for a fuel pump for a street driving 410 stroker. I have no idea which fuel pressure or gph free flow rate I need to choose. Any help would be awesomely appreciated. and happy new year everyone

My 410 stroker will be in a right hand drive vehicle so I will either have to get Aussie made tri-y headers or shorties. Do the shorty headers have a major power loss??

As above-Does anybody sell them? Is it possible to have a non-underdrive serpentine water, alt and crank pulley setup?

Happy Xmas everyone! So some moolah came my way so the 410 stroker is inching toward the build. It's a street car but I want powwwwwwwwwwwwwwwer and will run a hyd flat tappet cam. What brand of forged flat tops and hyd flat tappet lifters would y'all recommend?? Diamond are out of my price...

Hi, I'm building a 410 stroker for my a-body. This is going to be a street/daily driver but I want it to be a tough little car. How good are the Mopar LA Aluminium Heads P5153849. I'm not looking for 9 seconds at the track but am looking for good power. For example how do they compare with...

I'm building a stroker for the street and have been looking at cams. This cam really caught my eye...