Search results for query: *

Does anybody know what the clamping force in pounds was for any of the stock clutches that were in any of these old mopars. Like for instance a stock borg and beck style clutch with a 10.5" disc. Did mopar use this same disc and pressure plate on a 318 up to a 383? If so what was the clamping...

Hi Y'all, I am in the process of mocking together my project car before it comes back apart for paint. One of the things i was thinking about doing was using heim joint style rod ends for the clutch rod from the pedal to the Zee bar, then from the Zee bar to the clutch fork. I can prob spec...

Found a hurst shifter tower on evilbay #8779. Its got a reverse lockout built in so you have to push down to engage reverse gear setup. I guess that was hursts solution to the left and fwd reverse pattern next to first gear everybody used back then. Mopars solution was the orange light on...

Hi y'all, I am putting an A body A-833 in my 67 cuda and attaching it to an 8.75 rear. I have a longer driveshaft from a 74 dart with the correct yoke, and U joints. Can anybody give me the correct length dimension of a stock length A-833 4 speed driveshaft for a 108" wheelbase A body. A...

I found a zoom flywheel on summit racing website. Its a 130T , for a 10.5" clutch, 6 bolt , neutral balance. Would be perfect for my 318 build, but it says it fits 318s from 1985 to 1992. Part number is 50-3409 in summit catalog. I think this is a zoom part number. I am wondering if theres...

there used to be a calculator where you could plug in your trans type, what gear it was in, rear end ratio. engine RPMs and come back with theoretical speeds. it was even on FABO at one time. anybody remember this. id like to use it, but cannot find it on bigblockdarts website.

i am putting an A-833 OD tranny in my 67 cuda, i am using the OD V8 bellhousing. casting is from 1977 so probably out of a volare or aspen F body. i am looking at clutch Zee bar rebuild kits. one kit is for 67 to 71 A body, the other kit is 72 thru 74 A body. everything looks the same in...

hi Y'all i have an A body A-833 OD tranny im puttin in the cuda. i am needing the shift linkages and the threaded adjusters that go on the tower end of the rods. i have the shifter tabs still mounted on the tranny, and i have a hurst comp plus tower assembly. i was actually concidering...

hi all got a 67 barracuda i am converting from slant six 3 speed to V8 4 speed. i have the stock Zee bar from the slant six setup, i was wondering if the bar itself, and the down rod from the pedal to the Zee bar are the same from 6 to V8 thanks in advance matt

hi all i am building a 67 barracuda coupe. i am converting it from /6 three on the tree to 408 4 speed. got a friend who is selling an A-833 OD tranny. its an aluminum case one out of a dodge aspen short tailshaft. he bought it years ago for a diferent project. never used it. we took off...