Search results for query: *

Ex GF has a 64 barracuda with the push button trans. It has two issues. 1. wont start on key, but once you install a ahot wire to coil, you can start it off the relay and turn it off with key. 2. the car doesnt seem to have park anymore - we ulled the engine and trans out for new mounts and...

anyone know where to buy a new one? - also anything to watch for when buying the insert ribbon chrome?

Ok - so can the 1964 bush button set up be installed on a newer 904? I'd like to swap to a normal tailshaft/yoke system as I'll need to shorten the drive shaft due to the new 8.75 rear end replacing the old 7.25. help

So how far down do 1964 barracuda rear windows roll down? both of mine roll down about two inches - I havent pulled the panels or anything yet - but they both go down exactly the same distance I thought they were built to rolled down all the way

Are 64 A-body lower control arms the same as a non-sway bar 1969 B-body lower control arm - I cant find any difference in any of the measurements and views I take

Hi - I have a 1964 Barracuda that was made in May of 64, and I was wondering how you tell if that is a early production or not. I know the barracuda beat the mustang (april 15th 1964) to launch - so would it need to be an april production date to be 'early' mine has the push button (of course)...

Are 73 - 76 A body lower balljoints the same as the 69 B Body lower ball joints? I am using a b-Body front drum spindle set up with 73 A-body upper control arms for my 64 cuda and have brand new b-body lower ball joints

HI - fixing up a 64 Barracuda. V8 with 9 inch drums all around. I have switched the rear end to an 8.75 with big bolt pattern I have a complete brand new 68 B-body 10 inch DRUM brake set up that id like to use. I also have a set of the 73-76 A body upper control arms. So looking at the...