Search results for query: *

Parts for sale. Free shipping to lower 48 states if you buy at least 3 items. Paypal is ok. PM me on this forum. My zip 59719. Small block bell housing inspection cover off a 1970 Duster. Both bolt holes have good threads $25 Starter dust shield off the same...

Carb part number 1406. Electric choke. I bought this carb new, was used on another project that I no longer have. The carb worked fine with no issues. All the jetting and metering rods are original. The float setting has been checked and set to spec. Throttle linkage hole has been sized...

CERAMIC Dougs Headers D453 for sale. Fit A,B, and E bodies. http://www.summitracing.com/parts/dou-d453 Ceramic coating never polished, so coating is full thickness. Have about 2000 miles on them. Clearance dents near oil filter, passenger side, see the photos. Header collector reducers...

This Engle Racing cam was produced by the original Jack Engle Cams prior to year 2010. The cam was saved for a project and never used, engine was sold without it. The cam is NEW IN BOX. This Engle K56H cam is for a small block LA 273,318,340,360. Cam is hydraulic flat tappet with faster...

Crower hydraulic flat tappet "340 special" cam for small block mopar. NEW in box. Cam card included. 267/272 seat duration, 210/216 dur at .05 lift, .444/.444 lift, 114 lsa. Specs very close to OEM 340 cam. Will work with higher rocker ratio if desired. Wide lobe separation for smooth idle...

Mopar 10.5 inch Aluminum small block bellhousing casting #2892482. Transmission bearing retainer opening enlarged to accept larger 308 bearing. Bellhousing opening measures 4.805" inside diameter. I used this bellhousing on a E-body, and clutch pivot attach holes are there for A-body also...

New in box Comp Cam 268AH-10 for small block. Includes cam card and Comp lube. Will be double boxed for shipping. 268/276 seat duration, 222/226 at .05, .464/.464 lift, 1800-5800 rpm. Summit info: http://www.summitracing.com/parts/cca-20-309-4/overview/make/dodge Asking $70 OBO including free...

Moroso #25150 lifter valley oil baffle, in very good condition. Will fit all OEM flat tappet small blocks. I had it in a 1974 360, tweeked the pushrod holes a little for perfect alignment. The spring ends rotate and hook under the cylinder heads. It fits great and stays where you put it...

Big Block oil pan #187, matching 3/8 diam pickup tube, and drain plug. This is the preferred oil pan for BB swap into A-body. All parts clean and in good shape, no rust, no damaged threads. Asking $100 OBO including free shipping to lower 48 states. My location: Dillon, MT 59725 The first...

Over the last half dozen years I have slowly put the Challenger back together. I installed a nice 360 V8 engine. The engine runs great. I am getting older than I ever expected to live, and have decided to put a big block in the Chally, so the small block has to go. I could make a youtube video...

The first person that makes payment owns the carb. Location zip code 59715. SOLD #6322 1973 440 Auto, federal All correct jets and rods: 4098-5125-1966 pri-sec-rod New primary throttle shaft bushings installed I ran this carb on my 360 for 2 years. I tuned it for my 5000 ft elevation, so...

Any of these carbs could have the primary throttle shaft bushings renewed. This is easy to do using thinwall valve guide inserts swaged in place and reamed to fit. These carbs all need a complete cleaning and rebuild kit, not too hard to do really. Brass floats available on Ebay. I have...

Kit #10-114. Fits 850 cfm carbs for 1972 400 CID. The jets can be used on all 1972 and later TQ carbs since they are solid liquid fuel metered. The earlier TQ carbs were air metered. Asking $70 OBO and free shipping in lower 48 states. Location zip 59715 Send me a PM on this forum. I will be...

Edelbrock #61779. Small block Performer RPM magnum style cylinder heads fully assembled. Valve stem to guide clearance was checked and adjusted as required prior to running the heads. These heads have been run about 3000 miles with a mild street cam. ARP 7/16 diameter rocker studs included along...

Edelbrock #7577 to fit small block magnum style cylinder heads. Includes thermostat and housing, and bolts. I can include grade 8 bolts to attach the intake to the heads. An extra hole pattern has been added to run Thermoquad carburetors. Also fits Holley and Edelbrock carbs, I've had all three...

Quick Fuel carburetor in excellent condition. 750 cfm, mechanical secondaries, electric choke. Used less than 1000 miles. No modifications beyond jet changes. No stripped threads, no damage of any kind. Need to pay bills. Here is Summit info...

Pan in very good condition, with drain plug and pickup tube. Is for 2-piece rear main seal (not for magnum). Summit pan is $50 plus Melling pickup tube is $22. Pan has crank scraper and pan baffle added. I would enlarge the opening in the center sump, I could do it for you at no cost, just need...

Send me a PM for offers or if you have any questions. My location is Bozeman MT 59715. Thanks for looking. Milodon 8 quart oil pan # 30940 for 360 V8 with Milodon pickup tube #18345 http://www.summitracing.com/parts/mil-30940 http://www.summitracing.com/parts/mil-18345/overview/ Never...