Search results for query: *

Has anyone heard of a GPS tach ?? .. not speedo, tach.

How do you check gauge function.. I have a '68 Charger I'm taking the dash out to redo the faces, and need to see if the gauges work. Right now none of them register anything.

Don't work. I have constant power at the connector, don't know if I should. Not the flasher as I have three that work. Should I have constant power at the connector ?.......You think it's the switch ?? Any way to check. Novita Hazard Warning Flasher EL12

Like to use an aftermarket fuel gauge. Would I have to change the sending unit also. Anyone use a gauge that would work with the factory unit.

My volt meter and ammeter disagree. My volt meter reads about 14 V with a little accelerator. My ammeter reads slight discharge always a little more with lights or any electrical device on. Whats up, and please dumb it down. I know the difference between amps and volts, just don't understand why...

Twice this week my dart went dead completely. Went to the garage to take it out and nothing. No lights, horn, four ways. I removed the battery ground strap at the engine and filed off some paint and hit the cable end. Checked battery connections and they were fine. Today I walk in the...

Thought the pick up was bad ..I put a new pick up in and took the car out, drove fine.. for about 40 minutes and quit which was what it was doing and why I changed the pick up.. Started right back up and drove a couple miles home.. :wtf: .. changed the ignition model with new one I had, >...

Not hot to the touch, hot when I put my test light on it when the switch is on .. the wiper don't work ..just got car and wipers didn't work when i bought it .. new harness and ballast resistor .. any ideas why the housing itself is hot

Adding stereo, aftermarket gauges, and lights, think I need an extra fuse block. Can I run a wire from the alternator to the new box and does the box get grounded. Figured I'd check before I burn it down.

its not static....its when ever I touch my car if I put a screw driver to it ...it sparks ... go to get out touch body it shocks me ....remember this happening with a car mannnny moons ago ...can't remember the fix .......bad ground somewhere ?????

I'm replacing my dash and while I'm in there was thinking that a starter button or switch on the dash would be something different...have wiring diagrams but don't know how to do this or what type of switch or push button I would need any help appreciated ...fused / circuit breaker ?

My dash is hacked up so I'm going to replace it with another dash which I have made a large benzel type aluminum face plate for. I have the w/shield out and want to start to pull the dash but figured I would ask here first what I'm getting into . In my mind pop out dash ..wire gauges to alt...