Search results for query: *

heres a link to the thread about my girlfriend and i's first ever rebuild if you care for details: http://www.forabodiesonly.com/mopar/showthread.php?t=289902and heres a little video of it running, in the first clip I'm the one with all the tattoos.

hey FABO! always wanted to do EVERYTHING on a complete motor and I got the chance when I scooped up a '67 273 from a wrecked fish. so here's my progression pics and specs! stock pistons, rods, and heads. hasting rings had to polish the crank quite a bit so clevite oversize bearings were...

I've got a '73 340 that is, to the best of my knowledge, stock internals except the cam. it's got an eddy 4 barrel, aluminum intake, and eddy valve covers, but the cam was not installed correctly, and you can't time the motor with a light. I also don't know the specs of the cam, so I've made...

not sure which forum this belongs in so I'll start in small block tech. I use solid motor mounts in my scamp. I searched and searched and could not for the life of me find solid mounts ANYWHERE and I mean N-E-WHERE! so naturally the old man and I drew up some drafts and settled on 3X3 square...

at some point in time a '73 340 was stuffed in my scamp, before it was put in the car it had an Eddy intake carb put on it, as well as other small things like a hotter coil, and a cam which I (sadly) don't know the specs of. I don't know if they put in the forged crank or anything like that when...

anyone who has seen my posts knows that I change my mind way too much to e in the hot rodding game, so just throwing this out as an idea to see what comes back, I'll be going to the junkyard sometime to get some gears and if I'm lucky, a sure-grip out of a Dakota, that said, I've been in the...

somebody wanna lend a helping hand here? sold/traded all my A/C and Heater crap to a member here for an 8.25 rear, and now the installation of all the non AC stuff is a pain. I have all the components, pulled them from one of his non a.c. motors myself, but my main pulley doesn't line up with...

alright so I got a '74 scamp. 340 swapped into it, it's easiest for me to just list everything. what's it got? - comp magnum cam - edelbrock performer rpm intake - edelbrock 4bbl, don't know what cfm - accel super stack coil. - stock manifolds, true duals that dump about a foot behind...