Search results for query: *

I finally got some things done on my 67 barracuda. I got the engine & trans in the radiator, right header, shifter mech. & linkage. The left header, Z bar, starter, clutch fork & every thing else that goes with the trany is next.

I installed the rear RMS kit on my barracuda & it has an adjustment so i can lower the back of the car another 2 inches. What do you think should i drop it ?

The next project/puzzle i have in my shop. 73 duster 340 auto on the floor. It needs quarters, trunk floor, trunk ext. tail light panel, rt rocker, outer wheel wells, all rear brackets & braces. Also he wants it mini tubed & leaf springs moved in. Im finishing what someone else started.

Since i am not working on someone else car i have some time to work on my 67 barracuda. I got the RMS rear suspension all done. Im in the middle of putting the rear disk brake kit on just need to wait for the caliper paint to dry. I got all the front disk brakes done. Next thing will be the...

Got some finishing touches to do on the 68 barracuda then it will be ready to go home. Then on to the next one.

Sprayed a few more coats of clear today. Next step will be wet sand & buff.

Got the first 3 coats of clear on today. Let it dry for a few days then sand it with 600 grit. Then ill spray 3 more coats. After that wet sand & buff.

Got the stripes paint on the hood & trunk lid. What a pain in the a** I have some touching up to do then its clear time. yeehaa

Doing a paint job for a friend. I got the side stripes done today. Next he wants stripes on top. After that the car & garage needs a good cleaning to get ready for the clear.

Got my rear interior done on my 67 barracuda. Now all I have to do is the metal trim. I am going to change the red interior to gray & black. All the metal will be gray & all the soft panels will be black.

Slowly getting something done to my 67 barracuda. Dash is about ready to install. All the console needs is the carpet. Got the trunk moldings painted & put back on. The carpet is dyed. The door panels are dyed & put on. The black back side interior panels have carpet on. Going to install...

On the brighter side. Got the front BBP disks brakes, rubber lines & wheels & tires on the barracuda. The front brake line kit from DR. DIFF arrived today.

My new project. 67 barracuda no motor or trans. Originally 273 auto. on the floor. Other that a rust whole in the spare tire well no rust wholes any where. Hoping to gather as many parts as possible so when our gov. shuts down our county ill have some thing to do LOL

Got the demon ready for paint B5 Not sure how its going to go. Havent sprayed single stage paint for some time. Also the compressor I got doesn't seam to want to keep up. Even with an HVLP gun. But have to get it done so I can get it sold.

YO, This is what I have been up to. My dads 62 dodge polara 500. Max wedge motor coming soon.

Finally got something done to the cuda. Got all the body done. Sprayed on the white base for the stripes. Put on the paint mask that I got from CHALLENGERGARY. Then sprayed on the green base. I then sprayed two coats of clear. I am gonna block sand the clear when dry. Then I will spray three...

Well I got the lettering done on 69 barracuda trunk panel. I used a fine paint brush & sprayed paint from the can into the cap. When done I took some 2000 grit sand paper with a small sanding block over the letters. I think I could of done a better job with a finer brush. Tried to touch up the...

Cleaned up painted the trunk panel for my 69 cuda. Its not perfect but I just couldn't see spending 5 to 600 on a new one. Also got my tail light bezels chromed. Im getting there sloowwly lol

Hi everyone this is cawley. I know this isn't an Abody bit this what I have been up to lately. This is my dads 67 gtx 440 4spd. He bought it new, then traded it for a 69 barracuda in 69. He found it in the same town that he was told it went to. He bought it back about 8 years ago. We have been...

Got the left inner fender in & the left top of the frame where the upper control arm bolts on. Got the engine bay sanded primed, cleaned & painted. Also sandblasted the k frame then primed & painted. Put full factory quarters on both side ( put pics on later ) Now on to the doors.