Search results for query: *

ok i know how to 0 my my crank by putting the #1 piston to TDC. but how to i put the cam to 0? do i put it so the both lifter are at max hight? or what thanks

360 heads ported later on xe274 kb107s not zero decked so i can make 9.6 compression at 0.050 rpm air gap flow tech headers 750 vac carb either stock rockers or cheap roller rockers 2.5 exhaust with flowmaster 2 chambers AND NO 302 HEADS

ok im going to try and find some 308 heads to help me in my build THIS IS WHAT I PUT IN TO THE CALCULATOR AND IT GAVE ME 10.1 COMPRESSION 3.58 stroke 4.030 bore 4.155 bore gasket .062 gasket maybe smaller gasket 6.123 rods 6.00 piston volume 1.637 compression distance Approx...

im looking to run 9.1-9.5 compression in my motor with a xe274 what kb piston is better for it the kb232 or the kb107 becasue i heard with the 65cc head the 107 will be at like 10-10.5 compression and with a 65cc head the 232 will be at 9.1 because its 9.3 at 63cc so what pistons are better if...

who runs these times and who runs these times with a 360? what are your setups?

so this is going to be my set up and im jsut looking for a estimate on HP and ETS 360 motor gasket matched heads 75 degree angle bowl work guide work valve work back cutting valves etc what evers included in the valve job forged pistons 1.5 proform rockers 11/32 chrome molly push rods...

i just bought a cam and springs but what retainers do i use??? and for the pro form roller rockers what push rods do i use??? http://compcams.com/Technical/Search/CamDetails.asp?PartNumber=20-225-4 my cam my springs...

who has it and can help me set it up? like what is the cam specs @? and what are all those abrevations at the bottom? ivo evo ivc evc so on i need up getting a accurate estimate for the idea builds i have becasue so far it says my 318 would make 308hp at 5500 and 294tq at same rpm and...

ok so i found a local 360 motor for sale with forged pistons rv cam holly double pumper and weiand intake the only thing is that its a RV motor so its about a 75-80 motor and i dont know if i should get it please help me and let me know what i should do thanks