Search results for query: *

I'm looking for the narrow stainless piece that runs on the top edge of the interior panel. I see lots of ads for the similar piece that goes on the door, but I just need the back seat version, driver side. Here's a picture of the OTHER side. I suspect this piece is unique to the fastback, as...

Hi-lo horns, parts #2808868 & 2808869, with brackets, needed for a 1967 Barracuda. Also found on some E and B bodies. Shop lost mine. What do you have?

I assume any 2nd gen A-body hood hinges up to the point where they changed the adjustment slots would work, but I'm not quite sure when that was. Probably 1967-72. Shop seems to have lost mine (don't know why they removed them in the first place). Needed in Central Coast CA.

Looking for a working gauge for my 67 Barracuda. I would also be interested in a rally dash circuit board in good condition — this one has been re-soldered so many times I am beginning to think it may be part of the problem. SF Bay Area

I realize that most used fenders will not be perfect. I am hoping to find one with a good front corner that hasn't been smashed. Rust in the dogleg is not a huge issue as that part of my fender is OK. Willing to pay extra for a fender that will require less work. I will want to see pictures...

Broke one off with the stud in it. Hoping to find just one and not have to buy the expensive set of 20. This is the 2-1/4 inch long closed chrome lug nut used with the bolt-thru wheel cover option on first- and second-generation Barracudas, with the 14 x 5-1/2 inch wheel option. See photo...

I have a Federal pump, want to convert to Saginaw, so I need a complete working setup: pump, reservoir, cap, non-AC pulley, and brackets for 1967 slant six A-body. Do not need the steering box. Shipping to Menlo Park CA 94025. Thanks.

What I would like to get as a package would be the spindles, hubs, caliper mounting bolts, splash shields, safety switch, proportioning valve, and the hard lines to the MC. Optional parts would be the calipers, rotors, master cylinder, bearings and ball joints (all available new), and the upper...

My barracuda seems to have mismatched wiper arms. So I need another one that looks like this photo. If you can help me out, please state price and shipping to Menlo Park, CA 94025. Thanks! I apologize for the duplicate post. My computer crashed just as I finished writing and I assumed it hadn't...

I need a rebuildable cylinder head for a 1966-67 273, close enough for pick-up from the San Francisco Bay area (centering on Palo Alto). I would really appreciate a piece that was known crack-free, since I just had 2 rejected by the machine shop. I will consider a pair of heads if you feel you...

I have an uncut rally dash I was going to have restored, but it got broken in moving, and it is missing the lower corner on the right next to the glove box. I circled the area in red on the photo (this is NOT my dash in the photo, obviously). The dash that is in my car has the radio cut out, and...

I know, these are unobtainium. But the insurance company is going to have to pay for it, so drag your hoarded spare out of storage and quote top dollar! (And no, I am not interested in the "repro" part that fits "both top and bottom" -- I refuse to support that kind of crap. The upper and the...

...for my 67 Barracuda. I need the one with the center fold-down armrest. Headrests OK but not needed. Any color or condition considered so long as the frame is intact and not rusted. West Coast, please. I only see these advertised back east for some reason, and nobody wants to ship them (can't...

The one with the fold-down center armrest. Ideally within a few hundred miles of San Francisco CA. I have located others in the past but it just doesn't make financial sense to ship this monster cross-country.

Still looking for a front bench with fold-down armrest. Doesn't need to have great upholstery -- I can get a skin from Legendary. Have two 67 Barracuda buckets for trade, if wanted. Would need new skins and foams. Looking in CA -- obviously shipping would be a bear... Thx, Max

Wanted for my 67 Barracuda -- original front bench seat with fold-down arm rest. Black preferred, but not necessary -- I realize I would probably need to buy new skins. Have pair of 67 buckets to trade, if wanted -- need foams and skins. I'm in the San Francisco Bay Area. Would be willing to...

I'm looking for a lower control arm pivot stud or mounting stud... whatever you call it... the pin that goes into the bushing. I need a spare to go to the shop that is reinforcing my K-frame (they want it for fitting), while my bushings are getting pressed elsewhere. 1968 , if it matters. TIA

SB V8. My Barracuda is up on blocks waiting for this. The one I found was too far gone after I cleaned it up. I don't want to put the 67 K back in. So I am looking for a solid, usable piece that I can get rewelded and gusseted in time for Spring Fling. Thanks. BTW, I checked shipping on these...