Search results for query: *

Hey All, I still have about 12 sets of these mini starter conversion terminals left. They make life so much easier! 1 set (4 parts) is $25 per set via Paypal shipped to the lower 48 (only $24 if paying by check, MO, snail mail) Thanks, Chris E. Valiantone Williamsport, MD.

Hey All, I was sold out, but just finished a new batch. I have been making new bronze brake and clutch pedal bushings for a while now. There is a post over in the Brakes thread New bronze clutch and brake pedal bushings where I outline the process and have pics and some testimonials etc. So...

Hey All, I still have about 15 sets of these mini starter conversion terminals left. They make life so much easier! 1 set (4 parts) is $20.91 ea. via Paypal shipped to the lower 48 (only $20 if paying by check, snail mail)

Hey All, I just finished a new batch of bronze Brake and Clutch pedal assy. bushings ready to ship. I can't seem to update the old for sale thread on this one so here is the link: [FOR SALE] - Bronze Brake & Clutch Pedal Bushings **new** It has a few testimonials and such. The prices are...

Hey All. I have been making new bronze brake and clutch pedal bushings for a while now. There is a post over in the Brakes thread New bronze clutch and brake pedal bushings where I outline the process and have pics and some testimonials etc. So far I only make them for the standard size brake...

Parts lot. -Mopar Performance Electronic Ignition upgrade kit brand new with all connectors etc. -Ignition control module, new USA manufacture -2 RU4 ballast resistors, I always kept a spare in the glove box -1 Rotor All parts are brand new and in boxes. I went HEI and don't need 'em. Easily...

Hey All, I recently bought a mini starter for my 68 Val. I didn't like the original terminal block which had the posts facing straight up. There was no room for tools to tighten the terminals once the starter was installed. Someone pointed me to a post where there were part numbers for terminal...

This is the 400 Engine out of my Grandfather's 76 Cordoba. I have been saving it for YEARS to put in my A body. But I have at long last decided to go with an EFI Magnum. (shame on me!) So time to let go and sell it! As stated 400 Big Block from 76 Cordoba. Engine had 110K miles on it when...

Set of brand new LCA Box Plates. Bought from Mancini. Another item I double ordered. Grrrrrr. $17 + shipping and 3% for paypal. Located in MD Thanks, CE

Hey All, Brand new, poly sway bar bushing set. For 15/16 Dia bar. I ordered the wrong size for my car. Doh! $6 plus shipping + 3% for paypal Thanks, CE

Hey All, I ordered too many sets of these. $5 + shipping 3% paypal. Located in MD Brand new, never installed I used another set on my 68 val and they fit and work great. Soften them with a little hot water and they slip right over the torsion bar. Thanks, CE

Hey All, I ended up going with a different sized exhaust system. I wanted to be able to take the head pipes off. Using the old C type clamps makes that really hard if not impossible without destroying the pipe. Alternatively used at the muffler end, you could change mufflers if you don't like...

I have a 1975 stock 400 BB engine that came out of my 1975 Cordoba for sale. Complete from the intake down to the oil pan (minus exhaust mannies). No accessories on the front. Just the engine. The plan was to use it in my A body Val. Turns out I'm going sb instead. Can take some pics...

Small Block to 904 complete shift linkage. Includes all keys, washers, and the little brass spacer/tube. Used in good shape. Located: Williamsport MD $25+shipping Thanks, CE

Small Block to 904 complete shift linkage. Includes all keys, washers, and the little brass spacer/tube. Used in good shape. Located: Williamsport MD $25+shipping Thanks, CE

1 Inspection Cover and 2 Transmission braces. For a 904 Trans, out of 1968 Valiant with a 273 engine. Used in good condition. Located: Williamsport, MD $20+shipping Thanks, CE

Flexplate from 1968, 273 to 904 trans. Used in good shape Located: Williamsport, MD $10+shipping Thanks! CE

Brand new in the box Superior Shift shift kit for 727, 904 or 999 Transmissions. Never opened components package. Everything is accounted for and in perfect, new condition. From the manufacturer's website: Shift Correction Package This valve body kit deals with these problems: * Lockup...

Set of 1968, 273 exhaust Manifolds. Used in good shape Located: Williamsport, MD $30+shipping Thanks, CE

Set of shock plates in good shape for 7.25 rear end. Off my 68 Valiant Located: Williamsport MD $20+shipping Thanks! CE

This is a 9 X 1 3/4 brake s/u I took off my 68 Val when upgrading. Nearly new shoes (easily 90% shoe material left) and complete hardware kits. P/M with any questions. Want a cheap complete set up? Here it is! Located: Williamsport MD $20+shipping. Looks like it will all fit in a medium flat...

Hey All, I have a set of Log type Big Block Manifolds. Apparently you can mill a slight angle on the mating surface of the drivers side manifold and use them for an A body BB swap. I was going to try this but decided to go with a EFI sb motor in my car. Anyhow, how about $50 plus shipping...

Hey All, I have an 8.25 sure grip chunk with no gears. It did have 4.56's on it so I know this unit supports the numerically higher gears. A friend bought this rear for me thinking it was an A body rear, but in fact it wasn't. B/C I couldn't use the rear I pulled the chunk and tossed the...

Hey All, I have a Small Block 904 trans. I don't know what it came out of or what year it is. Don't know the condition so I am selling it as a rebuildable core. $75 Pick up only Located in Western MD Thanks, Chris E.

Hey All, I have a 1968 904 Transmission for small block motors I just pulled from my 68 Valiant. It worked perfectly. Pickup only. $150 Located in Western Maryland. Thanks, Chris E.

Hey All, I have a set of 11" backing plates. They are off a 8.25 rear but should work on 8.75 and Dana 60 as well. $40 plus shipping and 3% for paypal PS. I have drums too and your welcome to them for the cost of shipping. Dunno if they are worn beyond serviceable or not. Located in...

Hey All, I have a 8.25 sure grip chunk with 4.10 Gears. I know this unit is good b/c I ran it in my car. It'll spin them both. Unfortunately the guy who I bought the car from didn't know about the clearanced axle retaining rod so he just ground down the heel on a few of the ring gear teeth...

Hey All, I have a 8.25 sure grip chunk with good 2.71 gears. I believe this is the carrier break that goes 2.76 and numerically lower. $75 plus shipping Located in Western Maryland Thanks, CE

Hey All, Just pulled the stock 7.25 rear and springs out of my 68 Valiant. Rear is working perfectly. Dunno the ratio. Complete with all brake hardware, new shoes, new wheel cylinders, drums are in great shape, pinion snubber, stock springs and shocks. Heck even the brake lines (steel and...

Hey All, This is a set of FMJ or B spindles (actually off my personal 76 Cordoba) with pin type caliper/ caliper brackets. Also has dust shields (pretty crusty), calipers (if you want 'em for cores or rebuild), lower ball joint arm (if you want 'em) and most of the attaching hardware...