Search results for query: *

Anyone have a measurement of the 340 Wedge decal placement from an unrestored car?

Tried to order 340 WEDGE decal from Peformance Car Graphics. They no longer produce that decal. Does anyone know where to get a quality hood decal? I was told to make sure it was not a bumper sticker material?

Anyone happen to know if there are any differences in 70-74 Duster/Dart Sport drip rail mouldings? Also are the drip rail mouldings, like B-bodies. Where the trim is different for vinyl top and non-vinyl top cars?

Anyone used the 2007 Sublime (metallic) to paint an FJ5 car? Does the sublime metallic look out of place on the older cars? Just trying to decide on using the original formula 1970 FJ5 or the 2007 version.

Looking over a broadcast sheet for a 73 Dart Sport. It shows under wheels...... road - 55 color - TX9 (black) wheel cover 53 Anyone know what that all adds up to? Black steel with what cap?

Duster had its date with the media blaster today. We knew the spare tire wheel well area needed to be replaced already. So is it better to replace with the single piece trunk floor or the half sections? This is being done by a body shop and I would like to have the cleanest, most correct...

Strange thread I know. How about some pics of what your car/project looks like either before or after? I am trying to decide on how I want to finish the under side of my 70 Duster so I am looking for some ideas.

The body shop that is working on the Duster is planning to put the car on a rotisserie this week. They want me have the bottom of the car and the engine compartment sand/soda blasted. He talked to "his guy" and got a quote of $600. The main reason the shop wants the blasting done is because the...

How much play should there be in A-body hood hinges when there is no hood attached? I stopped in to check on my 70 Duster at the body shop today. If you hold the main portion of the hinge, the upper hinge had quite a bit of play side to side (while holding the lower half of the hinge...

Anyone have pics of the door jams on a 71 V24 car? Being my 70 Duster is an original /6 car I am going to go with the 71 paint scheme. Hopefully the car will finally see paint soon (after 3 years in the bodyshop). On the engine compartment it appears that most cars stopped the black about...

I noticed today that the chrome (stainless) roof rail trim is loose fitting on the 71 Dart. The car came from the factory with a vinyl top but that was removed during the repaint. Is there a way to "crimp" the trim so that it is not so loose without denting the trim?

What is the best plan of attack on reinstalling the hood tension spring that is on the inner fender? The passengers side on the 71 Dart has popped off the end. Is there a way to correct without removing the fender?

Anyone bought the reproduction A-body sport (rallye) mirrors that are the paintable version? Are the close to the original design or can you tell right away that they are repops?

In the area where the roof meets the drip rail area on a 70 Duster, was there any type of sealer used from the factory?

Who sells window moulding trim clips with the screws (with sealer tips)?

Does anyone have the correct measurements on the placement of the fender top turn signals on a 70-71 Duster?

Trying to decide on putting the wheel opening mouldings back on the Duster or having the holes filled while they are doing body work??? Do you prefer mouldings or not??

Has anyone bought a set of 1970 Duster reproduction bumpers that are listed on Egag? How was the fit and finish? Where is the best place to get the 70 side marker lights?

Did the factory use some sort of sealer between the front fenders and the inner fender?

Trying to decide on having the hood painted like the Duster Twister ladder stripe or buying the factory decal? Which would be better looking and more durable? Disclamer..not my car pictured below. That is way to nice for me!

I am looking for pictures of 70-71 Duster that have the factory style hood black out. There are 2 different schemes. One has the center section of the hood blacked out with the dual scoops. The other is the flat black that goes to the top edge of the fenders (covers the entire hood, fender...

Anyone heard about using "sugar" blasting to strip sheetmetal? What the pros and cons of sugar vs normal media or soda blasting?

Who makes the best/most accurate lower quarter patch panels? The lower 1/4 has rust about 4-5 inches up on the lower pass 1/4.

The hood hinge on my 71 Dart is rubbing the inner fender area as you lift the hood and close it??? Yet the passengers side is clear by 2-3 inches?? I noticed that the passengers coil spring is loose to the touch, and the drivers side is tight? So would the passengers side loose be letting the...

I am thinking about buying another hood for my 71 Dart and installing the dual scoops and doing the hood blackout. However I won't be doing the black out on the cowl area. I want to leave my original hood alone and have the option of putting the original hood back on and not having the black...

I am planning on ordering the 70 style Go-wing and trying to decide on the $199 version or going for the $469 "Concours quality" version. Anyone seen both models?? Anyone bought the $199 version and how did you like the quality, fit and finish??

I am going to install the new door weatherstrips on my Dart tomorrow. Should there be any trim adhesive used when putting them on?? The original weatherstrip did not have any adhesive, just the white clips. One set of online instructions said trim adhesive required. Another said, no adhesive...

Anyone have a picture of the clips that hold the rear valance on a 71 Dart?? PLEASE

Sorry for another question. Anyway the Dart is now heartless (motor and trans out), bottom of the car has been cleaned (spent three days laying on back with a pressure washer and a scrub brush), and the window jams have been sprayed and the glass is ready to go back in. Now that I took the...

Went to Amarillo last weekend to check on my 71 Dart and the the bodyshop said they needed me to get the clips that hold the windshield and backglass chrome trim. :scratch: Where can I find those?? THANKS IN ADVANCE :thumleft: