Search results for query: *

OK - ISO 60-62 A Body radiator....took someone's advice to get a Champion that was a bust...not even a close fit. Probably fits 63 and newer if anybody needs one cheap... I need the very unique and thin 60-62 radiator....thanks.

Help please....My radiator has begun leaking and I cannot find a reasonably priced replacement. Has anyone found an aftermarket replacement for the original slant 6 radiator in the 62 Valiant? TIA...

Hey ya'll...I want to replace the old and cracked buss fuse block with a blade fuse block. Are there any "go by" videos out there? I cannot find any. ANy help or advice is welcomed. Thanks!

For the group...I have a 62 V200 and want to add A/C... The space for it is very limited. I was curious if anyone might have changed to a thinner radiator with electric fans and eliminated the water pump fan to free up space for the condensor... Thanks.

Hey Gents - a couple of questions about the A/C install for my 62 Valiant 170... Do you think this will do me? BPE A/C Compressor Mounting Bracket Kit Slant 6 - Bouchillon Performance Engineering and how about adapting this fan / radiator setup? Fit 76-89 Chrysler Cordoba Dodge Plymouth Volare...

ISO 1960-1962 A body slant six A/C compressor bracket..Thanks. Jason

1960-1962 A body slant six A/C compressor bracket..Thanks. Jason

Seems I have been screwed again by a "kit" vendor...firt the power disc brake kit that I was assured by Pirate Jack would be a perfect fit and wasn't close...and now my A/C kit from Nostalgic A/C doesn't come close to fitting...Has anyone done an after market A/C install in a 60-62 Abody? Thanks...

Hey ya'll...back working on grandpa's Valiant...:lol: ISO OEM brackets for the under dash A/C evaporator...any help out there? Thanks! Jason

Thanks to SLANTSIX Dan, and all the others that helped over the past couple of years...Everything is good now except for the stupid gauges!!! Jason

Got the seat belts done, but having a heck of a time getting seat replaced correctly in the brackets...any help out there?

Hello AGAIN...:lol: My 62 Valiant horns work when I hot wire them and the relay tests good. Does anyone know if the steering column needs a ground wire to the dash for the horn to work? Thanks! Jason

Thanks for all the help these past years...Just awaiting the seat belts and I'll finish the interior installation an get a road test for the first time in two years!! Thanks again. :)

ISO wiring 62 A-body headlight / parking light wiring harness. Thanks.

HEY...I saw a thread before that explained how to add a PCV to a pre-63 slant six...any help in finding it? Thanks.

I have a few gallons of ethanol fuel in my tank - I have been told it will harm the fuel system...is there a way to counter the effects without raining the tank? Any additive I can use plus filling the rest of the tank with non-ethanol fuel? Any thoughts? Thanks!

Latest issue...when the body shop replaced the front floor pan they did not mark the bolt hole for the gas pedal. Does anyone have a picture of the pedal location for me to reference...my shop manual doesn't talk about this...Thanks!

Can anyone tell me if the 60-62 Valiant / Lancers had garnish molding on the A pillars and roof rails / headers? Thanks! I took my interior apart eons ago and cannot seem to find any as I try to reassemble...perhaps the frames were covered by headliner material??

Still working the electrical and rear window issues... anybody know if the 62 Valiant had tempered glass? The body shop "adjusted" the post position in the restoration and my window is too big now...I want to know if I can have the side cut 1/2"?

I am trying to replace the strut bushings and am trying to remove the struts without tearing down the K-member...any ideas?

OK. Thanks to you all, most of my electrical issues are over! However, dash / instrument cluster lights still don't work. All other accessories and lights work except gas gauge (pegs low)....Any more ideas? Thanks!

Hello again guys. I got my 62 Valiant running but now the gauges are pegged - fuel - pegged low and water temp pegged high - ammeter seems OK... No panel lights - once in awhile I get a backlight to go on (new switch installed) wipers work... Thought the instrument cluster voltage limiter might...

Help please. I just reinstalled my 62 Valiant 200 wiring harness, and according to the prints it is all connected properly. It cranks when jumped at the starter, but nothing when using the key...any ideas? All suggestions welcomed. Thanks.

Hey ya'll - just got my dash back from the paint shop and the catch for the glove box is "missing"... :-/ Looking for a part / source - even picture of what it looks like so I can fabricate. Can't seem to find one on the internet... https://photos.app.goo.gl/LPYZ3aukkK tC1hGb8

Does anyone have this emblem? Thanks! :thumbsup:

Hey ya'all...any help with this decode? I have searched and can't find anything that makes sense for it. Thanks.

https://scontent-mia3-2.xx.fbcdn.net/v/t1.15752-9/s2048x2048/52796997_392824838198042_3122191944290140160_n.jpg?_nc_cat=103&_nc_ht=scontent-mia3-2.xx&oh=e5e7529fcbbb68cc09812c0588457b90&oe=5CED7A4D

Help please. Does anyone know if 63 Abody handles will work on 60-62 Abodies? I want to replace / restore my handles...I am not finding any. I may end up having mine rechromed...Any help is appreciated. Thanks. Jason

Help please. I am trying to find correct window channels / seals for my 62 Valiant 2 door. I want to be sure I find the proper part....My car has a door post...from what I can tell this model is a "hardtop" not a sedan...true? Also, recommended sources for them would be a help too. Thanks for...