[Found!] 14X7 SBP Indy Slots (2) wanted.

[ChazRam]

Looking for a pair of U.S. Mag 5 hole Indy Slots for my 64 Valiant. Have two 14X6 already, trying to complete a staggered set. Located in Northern Illinois 60188. Please send pics of what you have if you can, thank you.
Chas.

 

[diymirage]

14x7 isnt staggered, you need my 14x10s

(let me check the shed tomorrow, i know there are some smaller ones in there, but they may be 14x6s )

 

[ChazRam]

Exactly what size are you looking for? big bolt pattern or small bolt pattern?

Did list as SBP, guess I should have just said small bolt pattern. Anyhow, looking for standard 3.5 backspacing indy slots in 14x7 size

 

[superchargeddrt]

My buddy has a set of SBP slots that he just took off of his 64 barracuda. HE'S on FABO AS @64mopar. I sent him a link to your thread but you might want to pm him as well. If I remember correctly they have new tires on them as well.

 

[George Jets]

14 x 7 like this one, is what he is looking for.

Nice wheel that fits under the back of the Darts, nice dish to them too.

 

[Mtrhead]

Got some 14×6's

 

[diymirage]

This is what I found, they are old, dirty and the tires are flat (I only bothered to picture one, but there are 2 there)

 

[ChazRam]

My buddy has a set of SBP slots that he just took off of his 64 barracuda. HE'S on FABO AS @64mopar. I sent him a link to your thread but you might want to pm him as well. If I remember correctly they have new tires on them as well.

Thank you, sent him a message. Hope he has them still.

 

[ChazRam]

14 x 7 like this one, is what he is looking for.

Nice wheel that fits under the back of the Darts, nice dish to them too.
That is the ones I'm trying to get. Going on a 64 Valiant

View attachment 1715932333

 

[ChazRam]

This is what I found, they are old, dirty and the tires are flat (I only bothered to picture one, but there are 2 there)
Sending you a pm.

View attachment 1715932377

View attachment 1715932378

View attachment 1715932379

 

[ChazRam]

Got some 14×6's

At this point, gotta be 14x7 but that might change if 14x7 don't fit. Thanks.
Chas.

 

[diymirage]

This little nick is on the first wheel, the other pictures are of the second wheel

(There is a little bit of rash, but nothing serious)

 

[toolmanmike]

At this point, gotta be 14x7 but that might change if 14x7 don't fit. Thanks.
Chas.

When you hit the "reply button" make sure you scroll down far enough to the blank space then you can respond.

 

[pomonamissel]

i've got a set of 4 us indy polished with the slots holes smoothed out for polishing

 

[ChazRam]

This little nick is on the first wheel, the other pictures are of the second wheel

(There is a little bit of rash, but nothing serious)

View attachment 1715932588

View attachment 1715932589

View attachment 1715932590

pm sent

 

[ChazRam]

i've got a set of 4 us indy polished with the slots holes smoothed out for polishing View attachment 1715932594

oh man, if only 7 inchers would fit the front of my car. Thanks but the distance would kill me even if there was only two.

 

[ChazRam]

My buddy has a set of SBP slots that he just took off of his 64 barracuda. HE'S on FABO AS @64mopar. I sent him a link to your thread but you might want to pm him as well. If I remember correctly they have new tires on them as well.

Still have not heard from your buddy about the wheels he took off his car. I did try to pm him, not sure if he got it. Going to try again later today after work.