1958 Dodge

[70DartMike]

This is my '58 Plymouth Suburban, 2 door wagon. It was ROUGH, I did a lot of metal work and a crappy paint job. Yes, Dodge front end, I was missing most of the Plymouth stuff. It had a 301 Poly and 3 speed Torqueflite, but I'm going to be using that 354 Poly in it.
3rd and 4th picture are how I found it.

 

[70DartMike]

I forgot to take a picture of my parts wagon, it's a '57 Dodge Custom Suburban, also a 2 door.

This is a '56 DeSoto Fireflite Sportsman, I mostly brought it home for the 330 Hemi, but I sold that engine a while ago. It's still here because I hate seeing anything crushed.
Power steering, power brakes.

 

[70DartMike]

Next is my '57 Royal Lancer parts car and my '57 Custom Royal Lancer (project).

The left one is the parts car, right one is the project.

Left has a 325 Poly 2 bbl, manual steering, manual brakes.
Right is Canadian, has a 301 Poly, manual steering, manual brakes.

 

[70DartMike]

Plus I have a few early Hemi's, the one on the stand is a '56 354 from a 300B. There's a '56 354 truck block on the floor. Orange one on the left is a '53 331 with extended bell and an industrial tag. The other is a '58 354 marine engine, with dual quad intake, dimpled valve covers and adjustable rockers.

 

[matthon]

parts car

Not sure if you've watched my videos, but looking for a few parts for my 58:

Driver side sun visor with the correct paisley pattern.
One 57 rear reflector lens, in the fin.
Generator brackets used with the 4 barrel air cleaner (2 barrel it's mounted on the right, 4 barrel on the left).
A solid rear bumper, do not need the upper wings.

 

[70DartMike]

Not sure if you've watched my videos, but looking for a few parts for my 58:

Driver side sun visor with the correct paisley pattern.
One 57 rear reflector lens, in the fin.
Generator brackets used with the 4 barrel air cleaner (2 barrel it's mounted on the right, 4 barrel on the left).
A solid rear bumper, do not need the upper wings.

I'll check my parts stash, I doubt I have a nice sun visor.
The reflector, I probably have.
Gen bracket, I only have the 2 bbl ones.
Rear bumper on the parts car has rust. So basically, no, I probably don't have anything you're after...

 

[matthon]

This group has been very helpful:
The Forward Look MoPar Network | Facebook

Meet a guy from Canada through FLOC, then actually met him at the Syracuse Nationals.

We traded some parts, and somehow he had 1 driver side sun visor which only fit a 58 hardtop or a 57/58 convertible.

Exactly what I needed for my 58 hardtop, it just didn't have the paisley pattern, but happy to find it.