1967 Dart sway bars hitting brake caliber

[Blair Harris]

Hi i have a 1967 Dart 383 with sway bars, it has been updated to disc frakes. The stearing only cuts about 1/2 way then the sway bars hits the brake caliber. I have no idea what the spindles and calibers are off of any ideas.

 

[oldkimmer]

..............Looks like B or E body sliding calipers.........u can move the calipers to the rear to solve ur problem.....u will have to chande ur spindle from side to side....kim.......

 

[Oklacarcollecto]

Here it is more detail. Take the complete caliper, rotor and spindle and switch sides with them. Drivers goes to the passenger side and passenger goes to drivers side. Leave the bottom ball joints where they are now. This will put your calipers on the back and stop your problem. Some people say you have to change the brake hoses but I can't say for sure.

 

[Blair Harris]

Thanks for your help i will give tha a try

 

[Oklacarcollecto]

Thanks for your help i will give tha a try

Glad to help.
There are several detailed threads on the site if you have problems.

 

[rob_robinson87]

It will look like this. You will most likely need the longer Volare brake lines to complete this. This is the right side shown.

 

[Jim Lusk]

The easy solution is to shorten the end links...

Either solution works, though.

 

[Jim Lusk]

First pic is stock sway bar end link, second is shortened link.