1969 Plymouth Barracuda Clutch return Spring

[GTS NOSE CONE]

Im looking for a heavy duty clutch return spring for my 69 Barracuda. I bought one on e bay and wasnt strong eonough to bring the pedal all the way back up. Anyone selling a heavy duty one ?

 

[dodge71demon]

I may be wrong but I'm not sure that the strength of the spring has anything to do with that. I'm thinking the heavier spring was to help push a heavier pressure plate in that's why they are called over center springs Are you using a 3 finger or diaphragm pressure plate?

 

[CUDACOX]

Im looking for a heavy duty clutch return spring for my 69 Barracuda. I bought one on e bay and wasnt strong eonough to bring the pedal all the way back up. Anyone selling a heavy duty one ?

I have a good one.p.m. me

 

[Moparparts]

Put me on the list. I have one from a 69 GTS 383 4-speed. PM sent

 

[Oldmanmopar]

Your problem is not the clutch pedal spring. I agree with Dodge71demon.

 

[Rocky_JS]

Your problem is no the clutch pedal spring. I agree with Dodge71demon.

x3 - what spring are you referring to the one on the clutch fork or the one under the dash? look under the dash and see if the overcenter spring is still there?

 

[GTS NOSE CONE]

I have to check to see if the overcenter spring is still there or if it was removed. Right now the clutch pedal sits the height of the brake pedal need it to go up that little extra bit.

 

[mrdodge69]

I have to check to see if the overcenter spring is still there or if it was removed. Right now the clutch pedal sits the height of the brake pedal need it to go up that little extra bit.

Is it a power or manual brake car? If it's a manual brake car, that is it. I am with the concensus on here. I removed mine when I installed my Centre Force clutch. Did the same to 2 others freinds A-body's as well. Sounds like It may just need to be adjusted.

 

[GTS NOSE CONE]

Yes its manual brakes in it.