2026 Car Goals- What’s yours?

-
Get my D150 in paint and back on the road.

IMG_4082.jpeg
 
Here are my plans for 2026

71 duster- replace the intake and exhaust manifold fix a broken mounting stud to elevate some pesky leaks on slant six. In process of that now. Then assemble and install a 83/4 3:55 sure grip at some point. But main goal is to keep it a nice driver and enjoy a few cruise ins, car shows/meet and greats etc…

1st 67 barracuda- my so called street car, I need to pay someone to do the body work or get serious about doing it myself. Haven’t even started the engine since replacing the heads and installing the dual quad tunnel ram. It’s a shelf for all my junk in the garage. Shame on me.

2nd 67 barracuda- I need to decide what this project will turn into or maybe just sell it. It’s a rusty parts car but I have enough parts to assemble a drag car with it. Narrowed Dana 60 spooled 4:56 gears, mini tubs, I have multiple engine and trans combinations to play with to just have fun.

I wish you all fun, time, money, motivation, and health. Happy New Years!
I'm selling everything just about. Will keep some tools for the daily drivers.....
 
I'm selling everything just about. Will keep some tools for the daily drivers.....
I sometimes think about selling out myself and maybe putting the money towards my principal payment on my house. I think a modest simple minimalist life maybe a better fit mentally and physically. I’m also a glutton for punishment so I keep messing with these 60 year old car relics. I have these mental battles often.
 
I’m currently cleaning out the bay of the garage to bring the blue 66 over for an engine swap. The engine is out, the new engine needs paint and mated to the new trans, then in it will go. I promised the bride it would be done by spring, and so it will be.

8A76AAEE-9747-45B5-8B12-ECF9D6E26E4F.jpeg


DAA99417-13F0-46F1-BFF5-2F0DC1C7C12A.jpeg


2D3F8F0B-2227-4843-ACE0-63B77D82CC7B.jpeg
 
Attend as many shows and events as I can here in the Pacific Northwest. Fly East and attend Carlisle sans car. Get the 70 GT ready for another 8000 mile road trip in 2027!
 
She loves the car, but she said it was “too loud”, imagine when she fires up the new 340 I built for it. Maybe an exhaust change will be in order, but the exhaust is actually in very good shape. Crap, more money!!
I like a deep mild tone letting you know there’s a v8 under there but not sounding like a shitstang with flowmasters blowing ear drums especially for a cruiser. Ironically my barracuda has a mustang exhaust made by Cervinis I got it for free, it sounds like a top fueler. Had I known it was a $2200 exhaust I would have sold it for a few bucks and used that to fund a more appropriate exhaust
.
IMG_7878.png
IMG_8203.jpeg
 
74 Cuda - Started out as replacing headers that rusted out. Decided to swap intakes. Somehow the heads ended up on the bench getting refreshed and the engine wiring unwrapped to sort out some issues. The car was running fine.

69 Charger - Finish up little details and give it a shakedown on a resto that has taken way too long. Haven't driven the car since 1991!

69 Dart convertible - Call in a priest and give this car an exorcism to find out why this car hates me. Its a fun car that runs good...kinda... when it wants to. The suspension is suspenseful even with a total rebuild. The brakes don't brake, even though they're all new.
I have done many cars over the years and this one defies all sense of mechanical logic. Maybe five years of sitting in the corner has done it some good.
 
74 Cuda - Started out as replacing headers that rusted out. Decided to swap intakes. Somehow the heads ended up on the bench getting refreshed and the engine wiring unwrapped to sort out some issues. The car was running fine.

69 Charger - Finish up little details and give it a shakedown on a resto that has taken way too long. Haven't driven the car since 1991!

69 Dart convertible - Call in a priest and give this car an exorcism to find out why this car hates me. Its a fun car that runs good...kinda... when it wants to. The suspension is suspenseful even with a total rebuild. The brakes don't brake, even though they're all new.
I have done many cars over the years and this one defies all sense of mechanical logic. Maybe five years of sitting in the corner has done it some good.
Oh that’s the Mopar curse that keeps on giving. Good luck with them in 26’
 

lets see.. my car goals are:

want to re do the brakes on the dart. everything... going to goto 11x2.5" in the rear also. only has 11x2" there now...
hopefully the modernized radiao is done soon for it. i'll get that in.
i need to fix the blower motor,. i think th eswitch is bad. be nice to have heat in it other then when you are moving.
think i want to go from the 2.76 gears up to a 2.94.
want to put a part throttle kickdown set up in it.
i'm sure there are a few other things that i can't think of right now too... who knows if i'll actually get that done.

on the 74 c-10
i need to do the entire brake system. have all the stuff, i just have to install it.
i want to install the umi suspension kit and rebuild the front suspension. i have all that stuff sitting here.
i want to install the new seat cover i have here for it.. that should look awesome when complete.
want to install the 4bbl intake and 4bbl carb on it.. have the intake i just need a carb.
want to chab=nge out the rear bumper. i have a nicer one here already.
i have to put LED headlights in it. after seeing how well the philips led's worked in the dart i need to put them in the truck.
need to clean out the second fuel tank and get that working.. long range would be awesome.. :)
need to put the electronic ign in it too..
i'm sure there is more. want to get it as reliable as possible..

i think i'm going to liquidate a few things too.. i don't see myself wanting to do a new project.

may sell an early A swap set up.. motor mounts, dougs headers, centerlink and whatever else i have laying here.
seriously thinking of selling all the lil red express stuff i have,. some of it is NOS stuff...
have some olds cutless seats that need to go..
have a ton of carbators laying around and i really don't need all of them..
 
Sounds like most of you guys want to work of stuff... I just want to drive mine... The more the better... Unfortunately the reality is they always need some kinda work...
 
Sounds like most of you guys want to work of stuff... I just want to drive mine... The more the better... Unfortunately the reality is they always need some kinda work...

the dart i really don't have to do any of the above to drive and enjoy. i'll enjoy it more with that stuff done,

the c10, brakes need to be done to be safe for all to drive.. then we can drive the hell out of it.. :)
 
For 2026, just drove the GSS as much as possible. 1 of 2 that actually gets driven

Finish the Charger and make it to Bonneville for tech inspection and rookie passes.
 
lets see.. my car goals are:

want to re do the brakes on the dart. everything... going to goto 11x2.5" in the rear also. only has 11x2" there now...
hopefully the modernized radiao is done soon for it. i'll get that in.
i need to fix the blower motor,. i think th eswitch is bad. be nice to have heat in it other then when you are moving.
think i want to go from the 2.76 gears up to a 2.94.
want to put a part throttle kickdown set up in it.
i'm sure there are a few other things that i can't think of right now too... who knows if i'll actually get that done.

on the 74 c-10
i need to do the entire brake system. have all the stuff, i just have to install it.
i want to install the umi suspension kit and rebuild the front suspension. i have all that stuff sitting here.
i want to install the new seat cover i have here for it.. that should look awesome when complete.
want to install the 4bbl intake and 4bbl carb on it.. have the intake i just need a carb.
want to chab=nge out the rear bumper. i have a nicer one here already.
i have to put LED headlights in it. after seeing how well the philips led's worked in the dart i need to put them in the truck.
need to clean out the second fuel tank and get that working.. long range would be awesome.. :)
need to put the electronic ign in it too..
i'm sure there is more. want to get it as reliable as possible..

i think i'm going to liquidate a few things too.. i don't see myself wanting to do a new project.

may sell an early A swap set up.. motor mounts, dougs headers, centerlink and whatever else i have laying here.
seriously thinking of selling all the lil red express stuff i have,. some of it is NOS stuff...
have some olds cutless seats that need to go..
have a ton of carbators laying around and i really don't need all of them..
are the 11x2” not working out for you? I have a set that I was going to use on an 83/4 and Dana both 11x2”. I know they are hard to find hardware for.
 
-
Back
Top Bottom