318 swap

-

Brown8404

Active Member
Joined
Oct 3, 2015
Messages
41
Reaction score
6
Location
Yuma
Hi everyone,
I have a 225 /6 in my 74 duster, and I was given a 318 by my uncle and he said it would marry up to the slant 6 tranny, and if not pushed hard it should be fine.

What do you guys think, I'm leaning towards looking for a tranny that is a for a 318. and also what about the rear end does it need to be changed as well.

Thanks for the advance for the advice
 
You are leaning in the right direction about the tranny.......a /6 tranny will not mate up to a 318! The rear end in it now MIGHT be an 8 1/4 which would be fine.

Good luck.
 
Well is this a stick or automatic? The engine / bellhousing pattern is different...............
 
Nope, need to switch transmissions. Not a big deal. 318s came with the same transmission, however since the bellhousing's integral you need to switch transmissions.
 
You're going to need a small block specific trans. I guess it's depending on the rear you have if you should swap it or not.
 
-
Back
Top