Meet-Joe-"Dart"
Well-Known Member
Ok just getting into my 360 build-up, thought I might ask for some thoughts/suggestions on how to build it. 70 Dodge Dart street driven.
I think I'm going to replace the 904 tranny with a nicely built 904 I found locally for sale. 3000 stall converter. The block (1970 dated block) 30 over, grind the crank, re-size rods (ARP wave-loc bolts), balancing everything. Haven't picked a cam yet (Comp Cams, the shop is gonna recommend something, I like a little lumpy but also an enjoyable street car) I think Keith Black flat top pistons (Hypereutectic)
Eddy Magnum heads(assembled), roller lifters, Crane roller rockers, Eddy Performer Rpm intake(not the Air-Gap too long to warm the car up... from what I read here?) Doug's ceramic headers(on order only5-6 weeks to arrive:thumbdow
I already have a new Eddy 650 carb on the car(I'll keep that) Mopar dist, stock balancer, that's about it. Some of these items I have already some I am just intending to use but haven't decided yet. Any thoughts or suggestions would be appreciated.
I think I'm going to replace the 904 tranny with a nicely built 904 I found locally for sale. 3000 stall converter. The block (1970 dated block) 30 over, grind the crank, re-size rods (ARP wave-loc bolts), balancing everything. Haven't picked a cam yet (Comp Cams, the shop is gonna recommend something, I like a little lumpy but also an enjoyable street car) I think Keith Black flat top pistons (Hypereutectic)
Eddy Magnum heads(assembled), roller lifters, Crane roller rockers, Eddy Performer Rpm intake(not the Air-Gap too long to warm the car up... from what I read here?) Doug's ceramic headers(on order only5-6 weeks to arrive:thumbdow
I already have a new Eddy 650 carb on the car(I'll keep that) Mopar dist, stock balancer, that's about it. Some of these items I have already some I am just intending to use but haven't decided yet. Any thoughts or suggestions would be appreciated.