360 clicikng valve train

-
D

dd386

Well-Known Member
Joined
Jul 7, 2025
Messages
52
Reaction score
17
Location
Florida
360 drivers side valve train clicking noise.
On the drivers side. Pulled valve cover oil not making it up to rockers to lubricate.
Possible clogged valley to upper valve train. Everything else was checked oil pressure 60 lbs. Clicking goes with RPMs
No money right now. Any suggestions that are sane. Can the car be driven ?
Solid lifter cam. Mechanic tells me new cam lifters. Like 1500 to 2000 to repair ?
Probably have to save cash then repair.
This car is giving me trouble ever since I purchased it. But I love my Mopar.
Not to many Mopar people in my area to help me. Or they refuse to help.
Thanks
 
You sure solid lifters? Then it has adjustable rockers. You might just try adjusting the rockers correctly. If they are way out, the oil holes can get misaligned and not oil the rockers. Find out what the valve lash is and adjust them correctly.
 
Did you check the valve lash?
With the valve cover off, start the engine and see if you can make a mess.
No oil? Take the rocker assembly off and inspect it.
 

I'm running Vavoline 10w30 dumped liquid moly in on the oil change and used some Lucas lifter clean
Somebody said to switch back to pure Synthetic might open the oil valleys.
Valve cover is coming back off soon
Rocker assembly seems correct
 
dd386 said:
I'm running Vavoline 10w30 dumped liquid moly in on the oil change and used some Lucas lifter clean
Somebody said to switch back to pure Synthetic might open the oil valleys.
Valve cover is coming back off soon
Rocker assembly seems correct
Click to expand...
Type of oil won’t change a thing.
Take pics of your set up the way it is when you pull the valve cover. Good clear pics, and post them.
 
Prob has adjustable valvetrain on one side and the bolt down Hydraulic rocker shaft in the noisy side...people do strange stuff when selling a car...if I recall correctly isn't there mods for a solid cam? like oil passages being plugged?
 
Last edited:
If any body knows anyone who is good Mopar mechanic around Daytona Beach Florida let me know.
Thanks
 
What about pulling the drivers side valve cover and wire cleaning and air pressure carb cleaner oil passages at rockers ?
Thoughts
 
dd386 said:
What about pulling the drivers side valve cover and wire cleaning and air pressure carb cleaner oil passages at rockers ?
Thoughts
Click to expand...
pulling a valve cover should be done regardless, see what you got cookin' man. who knows what's going on in there.

after that then you can assess next steps.

pull a cover. take pics. let's see where you're at. don't abandon hope, it may be something incredibly simple.
 
dd386 said:
If any body knows anyone who is good Mopar mechanic around Daytona Beach Florida let me know.
Thanks
Click to expand...
There’s a crap ton of mopar people right here ready and willing to help you.
Step 1 Pull valve covers.
step 2 take pics.
Step 3 post pics.
 
I'm here in Deltona, If I can help. Like others said, pull the valve covers and take a few photos. The experts can then chime in.
 
You must log in or register to reply here.
-

Similar threads

A
360 Magnum valve train noise
Replies
20
Views
1K
RustyRatRod
RustyRatRod
B
72 Dart 360 PVC valve issues
2 3
Replies
55
Views
3K
RustyRatRod
RustyRatRod
A
360 Magnum, stock heads, Ansen cast aluminum valve covers
Replies
12
Views
1K
Abodysrule
A
M
Cam Thoughts
Replies
16
Views
604
PRH
PRH
Jim Kueneman
360 Block Lifter Ticking
2 3 4
Replies
95
Views
4K
Bewy
B
Back
Top Bottom