440 build 500+ hp build
- Thread starter Miszny
- Start date
-
I see a viper on the lift, it deserves that engine
This is A&A reproduction.
This viper has some mods done. It’s not the fastest but still lots of fun do drive.
For interest, my friends 3700lb Challenger, 11.06@121, 1.54 60ft best=540>550fwhp.
440, 10.8:1, SFT cam with 1.6 rockers so .582",@.050?
6pk rods/KB pistons
MCH CNC Eddy rpm's (72cc) to approx 300+?cfm
Port matched M1, 830cfmDP runs well, wilson spacer
1.7/8" hdrs, 727, 4800 flash stall
3.91/28" stiff wall Hoosiers@20psi
c/tracs/mono's, QA1's.
440, 10.8:1, SFT cam with 1.6 rockers so .582",@.050?
6pk rods/KB pistons
MCH CNC Eddy rpm's (72cc) to approx 300+?cfm
Port matched M1, 830cfmDP runs well, wilson spacer
1.7/8" hdrs, 727, 4800 flash stall
3.91/28" stiff wall Hoosiers@20psi
c/tracs/mono's, QA1's.
-
Similar threads
