[WANTED] 68 cuda parts wanted

[cuda guy]

Hi everyone.

We just purchased a 1968 cuda drag car at Moperfest, now we want to make it street legal so we need some help finding parts.

Here is what we need.

A complete windshield wiper system all motors bars and bottles.

All the small knobs and controls for the dash board

Rear interior kick pads, headliner and dome light with wiring

A complete heating system

Btw if anyone has any info on a car that was named Boot scootin Cuda let us know.

Thanks for all your help and any info you are able to share would be gr8

 

[barracudakid]

i have:
complete wiper system
dash parts
dome light/wiring
rear pads
pm me

 

[moparbob71.2]

I have headliner bows ( fastback and notchback) and under dash heater box( non a/c)
PM if interested.
Bob

 

[jandc35]

Hey

I have a wiper motor only (no bars) and a bunch of dash switches and wiring off a 69 formula S i parted, I'm in Burlington, PM if you need more details

 

[VDART]

fyi, you will need to match your wiper items together-- meaning get everything from a 1967 , 1968 , 1969 etc.. they used different bushings in those earlier years & they do not interchange-- 67 & 68 have a bronze/brass bushing & should be bulletproof.

Also match the vari- speed with vari speed stuff & 2 speed with 2 speed stuff, the bushing on the motor mount is different along with the arm.
Lawrence

 

[Oklacarcollecto]

fyi, you will need to match your wiper items together-- meaning get everything from a 1967 , 1968 , 1969 etc.. they used different bushings in those earlier years & they do not interchange-- 67 & 68 have a bronze/brass bushing & should be bulletproof.

Also match the vari- speed with vari speed stuff & 2 speed with 2 speed stuff, the bushing on the motor mount is different along with the arm.
Lawrence

Xs2 and your wiring has to match the system too since it uses different plugs on variable speed vs 2 speed. Based from people that have hunted them some of the 1967 motors are unique and hard to find.

 

[cuda guy]

Thanks guys and gals

 

[cuda guy]

Hi

Still looking

Now I need a dash wiring harness and knobs

Rick