[WANTED] 68 dart bb headers

[happyjackdad]

looking for bb headers for 68 Dart

 

[Garys72Duster]

Could be wrong, but I think you will Prob have to go with at least 1 pipe thru the fenderwell, or use the Schumacher TRI Y, which is what I have on my 70 Dart, 440. Bill Bagshaw used to make the ones with # 7 thru the fenderwell. .

 

[RustyRatRod]

Do a search for Hedman B body headers. They will fit with minor mods.......some people have had them fit with no mods at all. Depends on which BB engine you have and how it sits in the car.

 

[belmateo]

B and E body headers have also been known to work with a 383, not sure about a taller block

 

[Garys72Duster]

B and E body headers have also been known to work with a 383, not sure about a taller block

Do you think some headers off a 69 RR Would fit in a 70 Dart with a 400 low deck motor? 1 7/8 pipes.

 

[oldkimmer]

Give it a try. Kim

 

[rlcbit]

I have a set . $125 +shipping

 

[SLOPAR72]

[FOR SALE] - Schumacher B/RB Ceramic coated Tri-Y headers 67-72 A Body

 

[belmateo]

Do you think some headers off a 69 RR Would fit in a 70 Dart with a 400 low deck motor? 1 7/8 pipes.

I would give it a go, you will find that for some reason the bb headers in a Abody actually have more ground clearance than the some of the sb headers.

 

[famous bob]

I would give it a go, you will find that for some reason the bb headers in a Abody actually have more ground clearance than the some of the sb headers.

I don`t know about tri y headers , but , their is a set of s/steel "shorty type" new ones for sale in the Tulsa craigslist. Been in there for quite a while .

 

[belmateo]

I don`t know about tri y headers , but , their is a set of s/steel "shorty type" new ones for sale in the Tulsa craigslist. Been in there for quite a while .

Probably wouldn't clear the steering box/shaft.

 

[Garys72Duster]

Those are definitely not Shumachers. Might fit on a rat rod, or something like that. The outlet is right below the 2 middle pipes.

 

[xLURKxDOGx]

[FOR SALE] - Hooker 5101-1 B/RB Headers

looking for bb headers for 68 Dart

Make me a offer if you can use them.
Jake

 

[moparstud440]

TTI 1 7/8" tube are good fitting, but $$$$