68 Dart Parts Interchange

[GTXperience]

Can anyone tell me if the following '68 Dart 4-door parts will interchange with a 2-door model (hardtop and/or post):

Windshield
Windshield Stainless Moulding

Rear Window Stainless Moulding (I am thinking it may work for 2-dr post cars only, correct?)

Front bench seat
Rear bench seat

Headliner Bows

Wing Window & Frame

 

[RedFish]

The 4 door windshield is 2 inches taller than 2 door and the angle is different too so the vent window wont work.Headlinner bows are somewhat universal and should be usable. Not sure about the rear glasses but I think they are the same , only changing for year model.

 

[GTXperience]

The 4 door windshield is 2 inches taller than 2 door and the angle is different too so the vent window wont work.Headlinner bows are somewhat universal and should be usable. Not sure about the rear glasses but I think they are the same , only changing for year model.

Thanks Red. Any thoughts on the seats? I am wondering if the seats are interchangeable and maybe the tracks are different (again, if there is any difference at all).

 

[RedFish]

The 4 door bench seat will bolt right into the 2 door but then you can't get in the back since those dont fold.

 

[GTXperience]

The 4 door bench seat will bolt right into the 2 door but then you can get in the back since those dont fold.

Not to worry if there's going to be a roll bar and no back seat. Otherwise, it's just a hop, skip and a jump over the front seat. ;-)

 

[RedFish]

I see. That'll work.
If there are any bench seat tracks left at the end of this ... I'd like to have them.