[FOR SALE] 8 3/4 Ring and pinion set.

-
Status
Not open for further replies.
triumphman

triumphman

FABO Gold Member
FABO Gold Member
Joined
Sep 5, 2013
Messages
371
Reaction score
124
Location
Oklahoma
Rating - 100%
1   0   0
Contact seller
This set was just replaced with a 3:55 gear set due to 75mph on I 35
Does not make any noise. There is no wear on the gears.
Ships from 73044, Guthrie, Oklahoma
$125.00 plus shipping. Postal Money orders only.
20220313_125101.jpg
20220313_130939.jpg
20220313_130317.jpg
20220313_130306.jpg
 
Interested, but what brand is it and what case is it for?

...and why does it say 3.91 on the box?
 
I'm also interested, but I have the same questions as the others. Please confirm the ratio and what case it fits.
 
Looks like a 741 application. No step feature used on the 742 and no taper as used on the 489. At least from what I can see from the pics.
 
YY1 said:
Interested, but what brand is it and what case is it for?

...and why does it say 3.91 on the box?
Click to expand...
The numbers on the gear is info you can research and determine who manufactured them for the factory in 1969.
 
66340SEDAN said:
Be a lot easier if the seller had a less confusing and provided more info and better pictures....
Click to expand...
The item: Factory ring and pinion gear. 3:91 ratio
Fits a 741 case. 1 3/8" pinion shaft (straight shaft)
Shows no wear on the gears.
I had a set of 3:55 ratio gears to replace the 3:91.
Where I live, "Interstate" I-35 is 75 MPH (miles per hour) Most run at 85 MPH. So, the 3:91 is a bit too low.
$125.00 plus shipping charges. USPS only.
 
Interested in 3.55.

Mistakenly thought OP was listing 3.55 from the text.

Glad that's been cleared up.

Please continue without quoting me.

Thanks.
 
Status
Not open for further replies.
-

Back
Top