AAR or T/A type mufflers for 3"

[Brad426]

Has anyone come across mufflers that have a 3" inlet and out let on the same end much like the ones used and the AAR or T/A's. Any I have found are 2.25" or 2.50". I'd like to keep my system all 3" but, need this style. Thank you.

 

[inkjunkie]

Might want to Google Spintech......they make a split case muffler....

 

[Brad426]

Might want to Google Spintech......they make a split case muffler....

Thanks I found them on Google but, can get to the site. Are they still around?

 

[Brad426]

My idea so far

 

[prodart340]

Maybe it's me, but I don't see why you need a different muffler. Are you trying to get the pipe further back? I'm lost!!!!!!!!!!

 

[fourspeed]

Thanks I found them on Google but, can get to the site. Are they still around?

http://www.spintechmufflers.com/ Works for me ???

 

[mopardude318]

pypes exhaust. violator mufflers....

 

[Brad426]

Maybe it's me, but I don't see why you need a different muffler. Are you trying to get the pipe further back? I'm lost!!!!!!!!!!

Look where the inlet is located.......Yes I wanted the exhaust tip just in front of the rear tire to look as much like the AAR/TA as possible. But, I can live with this to KISS....lol.

 

[Brad426]

All finished....
:cheers:

 

[inkjunkie]

Got any side view pictures??

 

[67Dart273]

Gee ZUZ that looks nasty

 

[Rat Patrol]

Not sure why you didn't use the 3" AAR muffler from Weldtech?

Last item on the page......

http://www.weldtechstainless.com/wtstainless_006.htm

 

[mopardude318]

looks good. what headers and x pipe is that? im trying to do the same thing, but using the violator muffs from pypes.

 

[Brad426]

Not sure why you didn't use the 3" AAR muffler from Weldtech?

Last item on the page......

http://www.weldtechstainless.com/wtstainless_006.htm

Cost & KISS

 

[Brad426]

looks good. what headers and x pipe is that? im trying to do the same thing, but using the violator muffs from pypes.

TTi 1 3/4" headers, custom cross over pipe made localy, spintech mufflers. :thumblef:

 

[Brad426]

Got any side view pictures??

Here you are.

 

[67Dart273]

My only thought that a little more bend/ swept back toward the tire might look better, but you are already light years ahead of my skill.

 

[Brad426]

My only thought that a little more bend/ swept back toward the tire might look better, but you are already light years ahead of my skill.

I agree but, I was trying to stay very KISS on this one. The less bends the better I thought. I can live with it.

 

[Rat Patrol]

Cost & KISS

Fair enough.