Adding Power Brake Booster

-
7

72DusterSlant6

New Member
Joined
Dec 1, 2011
Messages
4
Reaction score
0
Location
Arroyo Grande CA
Hello everyone. New to this site. I have a 72 Duster with slant 6 and A-904. Car has 4 wheel manual drum brakes. I want to just add a power booster to the setup. Is that possible and if so any ideas where to locate part. I ordered one from Tuff Stuff Performance but fitment to firewall was incorrect. Thanks
 
Not sure but I think you might need a master cylinder for power brakes.To replace the manual one
 
Any of the '67 A-body booster setups will work for you. Just get it complete with all the brackets, linkage, and braces. You can try your existing master if you want but it will probably be a bit touchy on braking.
 
Just wanted to let everyone know I found a universal brake booster at a local hot rod shop (7" dual diaphram) that will work with an adapter plate that mounts to the firewall. Just need to make small modification to length of pushrod.
 
You must log in or register to reply here.
-

Back
Top