Evan Dutch
Well-Known Member
Ok guys. I got some pics. Here you’ll see the original outline of the 3x3 squares I had poured. You’ll also see the final positions where the lift columns will need to go. They will be 6 inches from the nearest control joint as they cannot he mounted any closer. The lift column will need to be anchored in those positions as this will give me the most amount of workable area possible. The anchors provided measure 5.5inches in length with a diameter of 3/4inches. I’m not sure how I feel about this since the holes in the base of each column measure closer to 1in. The lift is an overhead design as well.