turbojerk
Well-Known Member
Curious of your set-up from wheels/rubber and suspension spec's...
...pic's would be awesome too!!
...pic's would be awesome too!!
Anyone Auto-X their early A's?
- Thread starter turbojerk
- Start date
-
my68barracuda
Well-Known Member
@slant sixCurious of your set-up from wheels/rubber and suspension spec's...
...pic's would be awesome too!!
check out the build thread that Greg has on his 64 Dart here on FABO.
Nice work on a neat car that is actually driven and autocross raced.
Curious of your set-up from wheels/rubber and suspension spec's...
...pic's would be awesome too!!
As John Mentioned, Here is my Grüne Hölle '64 Dart.. Every thing you ask is documented there except Tire Pressures and Alignment..
↓↓my notes and setup data for me to reference from 7/21/21↓↓
Alignment:
Caster +5.5°
Camber -0.75° ( I have the Thick Washers and Proper Grade 8 Bolts / Nuts - Will be installing them before Next event for -2.75°) (I bought longer bolts and some More grade 8 washers to add eve more - Camber as needed without having to do a total realignment.)
Toe 1/8" Toe In
1.03" Torsion Bars
1.125" Front Sway bar - Not adjustable - (Where can I source Adjustable Links for it?)
12" Long 200 In/# Coilovers rear on Reilly Motorsports 4 Link Setup.
Full Frame connectors Added, Torque Boxes Added
Corner Weights With 3/4 Tank Fuel, Driver in car and Driver Gear:
3226#
LF 711 RF 901
LR 697 RR 917
Dave And Matt Probably have More AutoX Laps and development than I do. As Matt G has shared with us..... Mr. Mapes' Documentation is superb as well for both the Mustang, Dart and Barracuda.. I should read up on his notes.
Greg
Greg
Well heck yeah. Old @slant six does, and @autoxcuda too, although I think his is 2nd generation Barracuda.
-
