GTXperience
Orig Stealth Mod
Moparman, you may want to post pics of the plates Duster sent you and put a measuring tape on them like Caveman did (basically duplicate his pics) before modifying them (if you plan to use them in some fashion).
FWIW, if you are trying to get the car up and running you can use 7.25 shock plates. You just need to elongate the holes by 1/4" and they will fit fine and u-bolts are as easy as the nearest NAPA.
I elongated the holes in my shock plates about 40k miles ago and have never looked back.
All this banter over $30.00. I dont know dusterdood but i couldnt imagine he needed 30 dollars so bad that he needed to screw you.
Its time to grow up and be a man and apologize for trying to slander dusterdood.
More than anything I want this resolved. If I actually sent you something you can't use, send them back, and you'll get your $ back. Check these measurements, and then post a picture if what I sent you is different. We'll go from there. Anyone here can feel free to E-mail me at;
[email protected]
My reputation here is something I value.
Its time to grow up and be a man and apologize for trying to slander dusterdood.
FWIW, if you are trying to get the car up and running you can use 7.25 shock plates. You just need to elongate the holes by 1/4" and they will fit fine and u-bolts are as easy as the nearest NAPA.
I elongated the holes in my shock plates about 40k miles ago and have never looked back.
I agree with Adam and George, and if I had the honor of moderating this forum, this thread would vanish into cyberspace ...