adamm Well-Known Member Joined May 23, 2011 Messages 343 Reaction score 60 Location Duluth, MN Jun 18, 2011 #1 The studs on my rear shock plates are bent and have no threads left on the ends. Is there anything to worry about if I drill them out and order new studs to put in? Thanks for the advice.
The studs on my rear shock plates are bent and have no threads left on the ends. Is there anything to worry about if I drill them out and order new studs to put in? Thanks for the advice.
caferacerx BAND MEMBER Joined Aug 15, 2009 Messages 3,593 Reaction score 51 Location philly PA Jun 18, 2011 #2 NAPA sells a replacement stud I would weld it in place for good measure
adamm Well-Known Member Joined May 23, 2011 Messages 343 Reaction score 60 Location Duluth, MN Jun 19, 2011 #3 Thanks for the info!
S sixpack340dart Member Joined Dec 8, 2010 Messages 20 Reaction score 0 Location Minnesota Feb 7, 2012 #4 Any Luck adamm?? I am also looking for a set for my 69 gts Thanks
dennday67 Well-Known Member Joined Feb 6, 2010 Messages 730 Reaction score 31 Location Yakima, WA Feb 10, 2012 #5 I drilled mine out and used shoulder bolts from my work. worked really well and easy to do.